> I have a big problem with .NET.
> I know that this problem is already treated in the Microsoft Knowledge
Base Article - 326219
>

> but the solution which is provided by Microsoft won't work on my machine
and is not very comfortable.
> Short Description:
> As long as I have an empty From in my Windows Application everything

> An unhandled exception of type 'System.ArithmeticException' occurred in
system.drawing.dll
> Additional information: Overflow or underflow in the arithmetic operation.
> I read on a discussion board that this is caused by something called FPU
Exceptions which could be enabled by a hardware part of my machine.
> Is there a Way to find out which part? Or is there a Way to turn them off
except the one on the MS Site?
> Any Solutions???

John Hornick [MSFT] wrote:
> Hi,
>
> In my experience, it's usually a driver which unmasks the FPU exceptions.
> You might try removing or changing your printer and/or video drivers, for
> example.
>
> Thanks,
> - John
> Microsoft Developer Support
> This posting is provided "AS IS" with no warranties, and confers no rights.
> Visit http://www.microsoft.com/security for current information on security.
>
>
>
>
>>I have a big problem with .NET.
>>I know that this problem is already treated in the Microsoft Knowledge
>
> Base Article - 326219
>
> http://support.microsoft.com/default.aspx?scid=http://support.microsoft.com:
> 80/support/kb/articles/q326/2/19.asp&NoWebContent=1
>
>>but the solution which is provided by Microsoft won't work on my machine
>
> and is not very comfortable.
>
>>Short Description:
>>As long as I have an empty From in my Windows Application everything
>
> works fine, but as soon as I add any kind of Control (e.g. a Button) to the
> Form I get the following Exception in the InitializeComponents method
>
>>An unhandled exception of type 'System.ArithmeticException' occurred in
>
> system.drawing.dll
>
>>Additional information: Overflow or underflow in the arithmetic operation.
>>I read on a discussion board that this is caused by something called FPU
>
> Exceptions which could be enabled by a hardware part of my machine.
>
>>Is there a Way to find out which part? Or is there a Way to turn them off
>
> except the one on the MS Site?
>
>>Any Solutions???
>
>
>