"Chris Michael" <news@intomobiles.com> wrote in message
news:2ufeg9F28u452U1@uni-berlin.de...
> Hello everybody,
>
> Newbie here. I've been working on this for the last two days and I can't
> figure out where this problem is. I think it's something so obvious, but I
> can't see it!
>
> OK, firstly in a very simple page (please see
> www.intomobiles.com/test3.htm - it just displays the code that i use in an
> asp page) I call a function "processForm". The actual form is described in
> an asp page and is SSI linked to the page (for the full function script
> please see www.intomobiles.com/test1.htm - again, this is just a htm page
> with the asp code in it so that you can view it). Well, this works fine,
> the function is called and executed without a problem.
>
> The problem is when I put the function into this page (please see
> www.intomobiles.com/test.htm - search the page for "processForm") it
> doesn't get called, it get's totally skipped over, not producing an error.
> I don't see why it will work on one page but not the other, it's exactly
> the same! (Isn't it?)
>
> Many thanks,
> --
> Chris Michael
> www.INTOmobiles.com
> Download 100s of ringtones, wallpapers & logos every month for only £1.50
> per week
>

> Hi Chris,
>
> Are you sure that the block of code with that call to the function is
> being executed? The overall structure of the code you're displaying in
> test.htm is something like this. I wound up with an extra End If at the
> end, but if you're not getting a compilation error for that, I probably
> just accidentally deleted an If somewhere. But, the point of displaying
> the layout like this is to show that, well, if this were a lottery, the
> chances of your function being called would be like 1 in a million. So, I
> suggest you put in some Respose.Write "I'm at location A", Response.Write
> "I'm at location B" throughout your code to see the flow of execution.
>
> If not bodyNode is Nothing Then
> If not commandNode is Nothing Then
> If commandNode.baseName = "MessageReceived" Then
> For i = 0 To commandNode.childNodes.length - 1
> Select Case commandNode.childNodes(i).baseName
> Case "id"
> Case "originator", "sender"
> Case "recipient"
> Case "body"
> Case "sentat"
> Case "receivedat"
> End Select
> Next
>
> if left(Eoriginator,2) = "44" then uknumber = "0" &
> right(Eoriginator,len(Eoriginator)-2) end if
>
> If instr(lcase(Ebody),"stop") <> 0 Then
> end if
>
> If instr(lcase(Ebody),"start") <> 0 Then
> end if
>
> If instr(lcase(Ebody),"password") <> 0 Then
> end if
>
> select case procedure
> case "1"
> If not RS.EOF Then
> If RS(0) Then
> End If
> End If
> case "2"
> If RS.EOF Then
> Else
> If RS(0) = "1" Then
> pass = rs(1)
> '****************** THE BELOW FUNCTION DOESN'T WORK!!! ************
> call processForm("EX0002469","447800140892",Eoriginator,"Your
> password is " & pass & ". Go to www.INTOmobiles.com now and start
> downloading. Thank you for using INTOmobiles. To unsubscribe send INTO
> STOP to 60066. £1.5/wk","Text")
> Else ' result is -1
> end if
> end if
> case else
> end select
>
>
> if err.number<>0 then
> end if
>
> if Len(doc.xml)=0 then
> end if
>
>
> if list.length>0 then
> end if
>
>
> if err.number<>0 then
> end if
>
>
>
> ElseIf commandNode.baseName = "MessageEvent" Then
>
> For i = 0 To commandNode.childNodes.length - 1
> Select Case commandNode.childNodes(i).baseName
> Case "id"
> Case "eventtype"
> Case "occurredat"
>
> End Select
> Next
>
> ElseIf commandNode.baseName = "MessageError" Then
>
> For i = 0 To commandNode.childNodes.length - 1
> Select Case commandNode.childNodes(i).baseName
> Case "id"
> Case "errortype"
> Case "occurredat"
> Case "detail"
> End Select
> Next
> Else
>
> End if
> End If
> End If
> End If
>
>
> "Chris Michael" <news@intomobiles.com> wrote in message
> news:2ufeg9F28u452U1@uni-berlin.de...
>> Hello everybody,
>>
>> Newbie here. I've been working on this for the last two days and I can't
>> figure out where this problem is. I think it's something so obvious, but
>> I can't see it!
>>
>> OK, firstly in a very simple page (please see
>> www.intomobiles.com/test3.htm - it just displays the code that i use in
>> an asp page) I call a function "processForm". The actual form is
>> described in an asp page and is SSI linked to the page (for the full
>> function script please see www.intomobiles.com/test1.htm - again, this is
>> just a htm page with the asp code in it so that you can view it). Well,
>> this works fine, the function is called and executed without a problem.
>>
>> The problem is when I put the function into this page (please see
>> www.intomobiles.com/test.htm - search the page for "processForm") it
>> doesn't get called, it get's totally skipped over, not producing an
>> error. I don't see why it will work on one page but not the other, it's
>> exactly the same! (Isn't it?)
>>
>> Many thanks,
>> --
>> Chris Michael
>> www.INTOmobiles.com
>> Download 100s of ringtones, wallpapers & logos every month for only £1.50
>> per week
>>
>
>