all groups > flash (macromedia) > april 2004 > threads for wednesday april 21
Filter by Day: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
POW sounds slows my game
Posted by sneakyimp at 4/21/2004 11:58:19 PM
hi:
i have the following code to create a POW sound for my boxing game. it works
ok, but every few times i trigger the sound, my movie freezes...it seems to be
trying to load the sound. what is the best way to preload a sound that you'll
need over and over again (like fist impact or guns... more >>
Flash video on a CD-ROM
Posted by waveturtle at 4/21/2004 11:54:27 PM
I have a swf file that dynamically loads a .flv file and plays. The flv was
created with the Flash video exporter. I have two questions:
does the quality of the loaded flv have anything to do with the frame rate of
the swf file?
what is a good data rate to get good video quality to play... more >>
flash player installation movie wont start
Posted by fastr68 at 4/21/2004 11:48:53 PM
windows xp, flash player installation movie will not begin, therefore i cannot
begin installation/download of the player, all i see are empty boxes when i
click to download flash player
ive had this problem before and i dont remember what was the cause, i think i
had to go download form el... more >>
Drag and Drop Learning Interaction
Posted by disney1981 at 4/21/2004 10:56:44 PM
Can someone explain the logic (or action script coding) behind the Drag and
Drop learning interactions for Flash MX 2004? Is the code comparing the
location of the movieClip reference point of the drag and the target? Or is
the code comparing the movieClip content and size (and not the refer... more >>
Flash and Layers
Posted by SirRule at 4/21/2004 10:45:54 PM
I have a flash file on my webpage, and I also have a menu on a layer. My layer always appears behind the flash animation. Is there anything I can do to change this. Thank you.... more >>
Relative versus absolute size/speed
Posted by trisha150 at 4/21/2004 10:35:13 PM
I'm just getting my feet wet with Flash and have been able to track down
answers to most problems I've encountered, but I cannot seem to locate anything
(on the web or in books) that addresses being able to enter relative sizes for
flash movies so the movie always fills the entire width of the... more >>
URL Encoding
Posted by katiliosk at 4/21/2004 10:24:38 PM
I'm using the loadVariables() function to suck up category descriptions. Since
these descriptions are written in non-english languages, I'm using PHP's
urlencode() function to convert the special characters. Below is an example of
what is being loaded after PHP encodes...
&desc10=Ber%FC... more >>
exporting audio
Posted by ss_user at 4/21/2004 10:09:14 PM
I am trying to export audio/video from a flv file using Flash MX Professional
2004. When I export audio/video files from flash, the files do not contain any
audio. However when I play them either in a flash file or before I embed them
into a flash file, I can hear the audio. As a test, I em... more >>
Don't see what you're looking for? Search DevelopmentNow.com.
Error: tmpFrame has no properties
Posted by Wasobi33 at 4/21/2004 10:02:17 PM
Error opening URL "file:///C|/Documents and Settings/Administrator/Local
Settings/Application Data/Macromedia/Flash MX
2004/en/Configuration/preview1.swf"
Exception in reverse: TypeError: tmpFrame has no properties
Exception in exportPreviewSWF: TypeError: instance has no properties
Error ... more >>
Newbie: Help with Combobox
Posted by Mrwabbit326 at 4/21/2004 9:52:58 PM
Ok Im new that this and i need somehelp. i need to know how to use a have the
user choose an opion in a combo box and then press a seperate go button to open
a link specified by the option the choose in the combo box. Example: the
navigation combo box, on macromedia.com. Thank you
... more >>
Flash Programmer
Posted by Frank Jiang at 4/21/2004 9:45:06 PM
I am seriously thinking of doing actionscript because I am tired of writing
code 'silently'.
How is the job market?
FJ
... more >>
Breaking movies into sub-clips
Posted by padmewan at 4/21/2004 9:42:18 PM
I'm trying to develop a project where I break a movie into pieces and interrupt
each piece with a short "quiz." I'm having trouble with either of the two ways
I've thought of how to accomplish this:
1. Import the original AVI file into Flash, then identify the correct
keyframes to stop and... more >>
MX 2004 trial software ends on day one
Posted by maashu at 4/21/2004 9:20:57 PM
Hey All,
This is probably a Macromedia question, but I tried out Flash MX back when it
came out and let the 30-day trial run out. Now my company is interested in
trying Flash MX 2004, but when I installed it, it took several tries (and a
reboot) to get it to even start. When it did, it s... more >>
Character Limit in Dynamic Text Field
Posted by crmilner at 4/21/2004 9:09:36 PM
Is there an upper limit to number of characters or lines in a dynamic text field. My txt file is not fully importing but is clipped part way through.
Any help much appreciated.
Thanks
Charles... more >>
Flash Debugger reliability in Flash MX
Posted by candrade001 at 4/21/2004 8:48:45 PM
Hi All,
I've done a search through the posting archives for peoples opinions with the
flash debugging tool and I was wondering if there's a general consenus on the
debugging utility. To use it, or not to use it.
I have a project that I'm trying to debug. There's a generous amount of
ac... more >>
Sequence of bitmaps with fade out
Posted by Guido.77 at 4/21/2004 8:48:10 PM
Hi,
Does anyone know which is the best way to create an animation with raster
images (sequence of bitmaps), with a fade in and out between each?
I know that using one by layer is ok, but with too many images is pretty
complicated, wright?
Thanks!!
... more >>
Swap Flash For a GIF if no Plug-In?
Posted by davidlieb at 4/21/2004 8:24:21 PM
I've added some flash to my site, but would like it to swap out with a gif if
the user doesn't have a plug-in. I've seen sites that do this, and tried to
study them, but couldn't get it to work.
Is there a tutorial somewhere, or can someone tell me how?
Thanksbunches!
... more >>
Flash Player Version History
Posted by topper2k at 4/21/2004 8:20:22 PM
Can anyone tell me where I might find a history of when each version of the
Flash player was released? Ideally it would be nice to know what browsers
shipped with which versions as well. Is this data out there somewhere?
... more >>
Flash and Java applet communication
Posted by jannable at 4/21/2004 8:04:01 PM
I'm trying to get Flash and Java applets to communicate on the same page. I?ve
already developed what I thought was a wicked solution: Flash?s XML socket
connecting to the Java socket server. But it seems that it is restricted by
Flash?s same-domain security when the Flash movie is hosted on a... more >>
Can Flash grab still of GUI and save as a PDF?
Posted by slc2000 at 4/21/2004 7:58:27 PM
Anyone know if a Flash 7 swf can somehow save out a still of itself as a PDF, or something that can be converted on the fly into a PDF?... more >>
speed difference between flash player and browser
Posted by mcclard at 4/21/2004 7:43:37 PM
I have been noticing a difference in speed/smoothness between the flash player
and the browser. I test the flash movie and it looks great. I open the movie in
the flash player it looks great. Then I open the movie in my web browser (IE,
Safari) and it runs slower. Quite a bit slower. Note I a... more >>
Format to bring files into Flash???
Posted by Steve at 4/21/2004 7:37:47 PM
I want to bring some still images into Flash and move them across screen.
1. What is the best file format to bring images from Photoshop into Flash?
Since they are compressed when they are made into a .swf should I just bring
them in as .tif or .psd?
Thanks!
... more >>
SWF Alignment in HTML
Posted by lingowizard at 4/21/2004 7:27:41 PM
In the publish options of MX i checked center for alignment on the HTML tab.
However, when I load up the html file it's left justified in the browser. So I
pull it in Dreamweaver and center it there using the properties panel. Wham it
moves to the center. F12 - launch browser (IE) and whack! i... more >>
mask disables input text field??
Posted by Bryant_W at 4/21/2004 7:09:52 PM
I have a guestbook which rolls out of the bottom of my gui. It is
masked.....obviously...so you will only see it when it rolls out. The prob is
my input text fields do not respon with the mask over them......If i remove
the mask, they work perfectly fine......but then that defeats the whole p... more >>
Load movie to target not visible in browser?
Posted by Bryant_W at 4/21/2004 7:01:57 PM
When i load movies to levels in flash and drop into html file, everything works
fine........When I load movies to a target they do not show up in the browser
........They ane not there?........Someone please help!.......
... more >>
direct flashpopup from flash?
Posted by Hugo Bozz at 4/21/2004 6:10:22 PM
is there somehow a possibilty to create a flash-popup direct from flash
without using java-script?
maybe using the new flash-components like "window"?
thx,
fritz
... more >>
Making Flash texts searchable by Search Egines like google...
Posted by Arturo Toledo at 4/21/2004 6:06:51 PM
Ok... say I have my text inside a flash movie and it is not being imported
from an XML source or text file... it´s plain text inside Flash... Is there
a way to expose that content to Search Engines like Yahoo! or Google?
because as long as I know this kind of services find info in HTML docs and
... more >>
object vs. embed: more IE/Win weirdness
Posted by dangler at 4/21/2004 5:37:43 PM
I'm creating a page with 3 embedded SWFs talking to each other via Local
Connection. For a long time I couldn't figure out why they worked great on all
Mac browsers, but not at all on a PC (load bar hangs, SWFs never load). So I
removed the OBJECT tags from each SWF, so only the EMBED tags wer... more >>
Rich Text Editor Settings
Posted by whynotrob at 4/21/2004 5:28:16 PM
I am trying to set the default font from courier to arial for the Flash Rich
Text Editor contained with UI Components 4. Is it possible?
Also, does anyone know if it is possible to tell the RTE not to wrap
everything in <FONT> tags?
Thanks for your help.
... more >>
Business Customer Penetration?
Posted by nateswart at 4/21/2004 5:22:11 PM
[L=This
URL]http://www.macromedia.com/software/player_census/flashplayer/version_penetra
tion.html[/L] discusses the Flash Player penetration rates ... is there a
similar statistic that focuses only on business customers (as opposed to home
users and/or all users)?
Thanks!
-Nate
... more >>
Deep Linking into .swf movie
Posted by johnnysteed at 4/21/2004 5:13:46 PM
I have built a portion of my website using a Flash movie, with internal
navigation within that movie. I want to be able to link from outside of that
movie, to a specific frame within that movie. Is this possible?
Anyone with any advice please.
... more >>
thumbnail
Posted by Megnote at 4/21/2004 5:06:22 PM
Is it possible to creat a thumbnail in flash or dreamweaver?... more >>
Scrolling text
Posted by Lubula at 4/21/2004 5:03:22 PM
New at Flash. I'm trying to create scrolling text like in the movies. Anyone knows anything ?... more >>
Need help to save info to text file.
Posted by Dave at 4/21/2004 4:17:49 PM
I'm pulling my hair out trying to dynamically save to a text file.
Anyone have a recommendation of a tutorial?
Dave
... more >>
Video and Audio don't sink.
Posted by bferchaud at 4/21/2004 3:58:10 PM
Hi,
I have a video file (flv) that contains the audio with it. When I import the
file into a empty fla file and test the move if plays fine. However, when I
import the file into my working file that has all of the elements that wrap
around the video and test the movie the audio is several ... more >>
Sending variables to local disk
Posted by Graff|ti at 4/21/2004 3:51:46 PM
I have an interactive movie created exclusively in Flash MX, and it needs to
send some of it's variables to my local disk, for example it should do that
when I push a button instance in the movie. Flash cannot write text files or
local disks, but I know that Director can, but I don't know what... more >>
Browser Button when using FLASH
Posted by Sara27 at 4/21/2004 3:51:00 PM
In Flash how do you make it so that when you press back in the browser it will go to your homepage and wont leave your site??????... more >>
I lost my CD key...
Posted by -=TIG=- at 4/21/2004 3:47:43 PM
I just had to format my PC and i cant reinstall Flash MX because I lost the CD Key, what should I do?... more >>
Play Backward
Posted by Tim at 4/21/2004 3:39:25 PM
Hi,
Is there any option with actionscript to let a movieclip play backward?
Hope someone can help.
Thx
... more >>
Real Audio & Flash
Posted by purcy at 4/21/2004 3:04:28 PM
Does anyone know how to link to a real audio ".ram" file in flash so it
downloads without "getURL()". I don't want flash to open a new browser window
or open in the current window I just want to link to the file so the RealPlayer
launches when the ".ram" file downloads... Probably really simpl... more >>
Link to web page ?
Posted by LucentGuy at 4/21/2004 3:01:34 PM
Ok,
I'm no expert...I've figured out how to add a behaviour to a text symbol which
links to a web page...
The problem is, the link is only active (the little link hand shows up) only
when hovering above the text itself....is there anyway to make the whole window
an active link?
Tha... more >>
Repeating Movie !!! WHY WON'T IT STOP
Posted by compufix at 4/21/2004 2:48:23 PM
Everytime I make a file in Flash and publish it, it won't stop repeating when
the I've intended to only let it play once as a title etc.
Very basic question but very irritating to me.
Sometimes this can be a bonus but most of my trial sites are ruined by this
repeating movie thing!!
HELP M... more >>
Loading Extensions
Posted by brianirons at 4/21/2004 2:46:10 PM
Good Morning. I have Flash MX 2004 Pro. I downloaded a few extensions from this site in a .mxp format. My question is; how do I install these extensions so that I may use them?
Thank you
Brian.... more >>
3D Text Rotation -- cbtcafe.com
Posted by kjf at 4/21/2004 2:45:59 PM
Hi,
I'm a Flash newbie so some of my issues here might be due to that.
In any case, I am trying to follow a tutorial on creating a 3D Text Rotation
as shown here:
http://www.cbtcafe.com/flash/3dtext/3dtext.html
I have followed the instructions 3 times and am stuck.
On the page 2, (http... more >>
E-Learning
Posted by aiouolive at 4/21/2004 2:40:50 PM
flash supports web based learning management system.... more >>
Pixels not lining up when published in 6 or 5
Posted by ChrisFlynn at 4/21/2004 2:28:14 PM
Hi all
I'm having problems with Flash's publish settings for bitmaps, particularly
when it comes to publishing to lesser players, like 6 or 5.
I have a Flash MX 2004 Pro file, when I publish it as a Flash 7 swf that
contains only a gif image (no animation, no tweening, its just the gif a... more >>
Javascript to Flash Communication
Posted by da01661 at 4/21/2004 2:16:05 PM
Hello,
I would like to ask how can i call "gotoFrame" through javascript when the
target frame is a frame inside a movie clip in the flash? And for the
"setVariable" function in javascript, what kind of variable can be set? is it
all kinds of var is supported?
Thanks!!
... more >>
Flash Intro
Posted by n2art at 4/21/2004 2:11:12 PM
I do have one more question. I am new to Flash , like I mentined I created a
Flash intro, and I am not sure how to incorporate it into my site. I want it
to be the first thing when my site opens, so does it have to be THE index page,
or incorporated into the index page? Thank you again.
M... more >>
Traditional preloader won't work, any ideas?
Posted by lottalove at 4/21/2004 1:53:59 PM
I have a right to left scrolling gallery that I need to get rid of the white
flash that preceeds the initial loading of the gallery. Usually I put a
preloader on the first frame of my movies to correct such a problem but when I
do that with this it just bounces back between the 1st and 2nd fr... more >>
water like effect
Posted by Shyne2010 at 4/21/2004 1:45:36 PM
Does anyone know how to do this effect shown on this web site
http://www.djmaxglazer.com/direct/mg/
its like water movement bringing in the image... more >>
Skinning Experts?
Posted by Buff Dogg at 4/21/2004 1:39:33 PM
Does anyone notice how Macromedia.com has the scroll bar light up when you
hover it or drag it. [b]Like found
[L=here]http://www.macromedia.com/cfusion/exchange/index.cfm#loc=en_us&view=sn11
0&viewName=Flash%20Exchange[/L].[/b] I was trying to apply skins to the thumb
so it would do that but... more >>
Text from remote files?
Posted by Screenweasel at 4/21/2004 1:15:43 PM
Hello, and good morning.
My question concerns loading text dynamically from a separate file for the
purpose of easy revisions and updates. Is this possible?
The extent of my initial research shows I can load Actionscript text
dynamically, but I found nothing to support normal, readable t... more >>
MAC IE bug/issue!
Posted by richardhallgren at 4/21/2004 1:11:28 PM
Hi,
I have an extremely irritating problem that I hope someone can help me with or
at least give me a new view on.
We have developed this application for a customer and we keep getting a
problem with the preloading on IE on Mac only!
Url: http://www.dreamforce.se/trafikregler/
It... more >>
get Url bugs from Flash Player 6
Posted by artpea at 4/21/2004 12:50:56 PM
Hi,
I am using the normal get URL code ( ie: on (release)
{getURL("http://www.cnn.com", "_blank");} )
to link to external files from a flash mx .exe, but now on only one click TWO
duplicate external windows are opening instead of one! It seems to happen when
using absolute or relative ... more >>
HELP me please
Posted by WWW. aldoferrari .IT at 4/21/2004 12:37:32 PM
ciaoa tutti. io uso flash da poco e mi sto cimentando con l'action script.
ho da fare un flash ma no nso com e fare.
HELP ME PLEASE
ho una cartella con al suointerno:
- una cartella "carrelli" contenente
- una carella "nuovi
-contiene 2 immagini "c... more >>
SWIFT 3D 3.0 ACTIVATION CODE
Posted by crrd NO[at]SPAM hotmail.com at 4/21/2004 12:16:23 PM
Any body knows some activation code that works ???? Id triyed
houndreds and nothing happen!!!!!!!!..... more >>
goto from nested movie
Posted by Scott Saraniero at 4/21/2004 12:03:59 PM
I have a button in a movie symbol (placed in the main timeline) that I want
to put a goto action which will gotoAndStop a specific frame on the main
timeline. It seems simple, but nothing I try works. Everything I research
on "targets" speaks about instances. What am I missing? Can someone pl... more >>
How to view a Flash movie in Televison
Posted by maverick FM at 4/21/2004 10:52:17 AM
Hello Eeverybody,
I have done a small presentation in Flash MX - Windows XP. The presentation
includes text, images and video. When I export the fla to avi, the avi is
playing fine. But when I burn it in to a VIDEO CD using Nero 5, the entire
presentation is looking in to two halfs. When a... more >>
Creating a kinda DB driven CD with Flash...
Posted by nathanpitman.com at 4/21/2004 10:51:56 AM
Anyone have any experience or know how on whether it would be possible
to crate a Flash based CD-ROM with database driven content, but actually
store the data in XML files on the CD???
I'd need to be able to search for records, sort results, that kinda thing...
Let me know.
TIA!
Nath... more >>
2nd post
Posted by Oli at 4/21/2004 10:39:04 AM
Sorry top ost it again...
But no one answered to me and I guess that by now it'll belost.
Hi everyone...
using flash MX.
I can successfully import mpg files into my movies.
The problem is that it seems to be cutting the first second of the mpg away
....
Meaning ... the 1st segment of the mp... more >>
MediaPlayback won't play URL from XML-file
Posted by raapie at 4/21/2004 10:17:14 AM
You can download my example file here:
[L=http://frans404.free.fr/files/flash/MediaPlayback-mx2004Pro.zip]http://frans4
04.free.fr/files/flash/MediaPlayback-mx2004Pro.zip[/L] (FlashMX2004
professional).
As you can see I am trying to load XML-data. I am only reading the first
child-node. A... more >>
can videos be loaded dynamically?
Posted by daveluff at 4/21/2004 9:29:12 AM
Hi there,
can I load in movie files on the fly into flash. This is going to be used on a cd rom.
Thanks,
Dave... more >>
Attaching a variable to a button
Posted by Danny S at 4/21/2004 9:22:47 AM
I wish to use a variable to say whether a button in my Flash application has
been clicked or not. When the button has been selected i want a tick to appear
next to the button. The button opens up a different movie and when they have
finished with this one and go back to the main movie i want t... more >>
Help... Integrating xml into flash
Posted by Sauagecowboy at 4/21/2004 8:40:22 AM
Hi,
I need some help on someone to show me how I can integrate xml into moving text in Flash, could you please point me to a tutorial which may help me.
Thanks for your time
Zid.... more >>
Please help me with radio buttons
Posted by pvnrt1407 at 4/21/2004 8:40:16 AM
I believe that this is a silly question but i really don't know the answer.I
would like to change the default font and the default font size of my radio
button label but i don't know how. If i want to change the color of the label i
write the following actionscript:
[b]radioButtonName.setSty... more >>
Creating a Loading Screen... I know it's pathetic
Posted by John Mason at 4/21/2004 8:37:23 AM
Ok I'm kind of new to flash and I was wondering how all the videos and stuff on
the internet have those loading screens. Can anyone tell me how to make one or
where a tutorial is that can help me. Thanks alot for any help you can supply.
... more >>
about e-learning
Posted by visu at 4/21/2004 8:36:26 AM
hi
thanx for response for the previous thread about elearning. and the valuble
domains... i wld like to know more the tracking system.
is there any database??? or how when the pages or quiz results are tracked and
where its getting stored. if there is any database conncetiv connected to ... more >>
gradient mesh to flash, transparency problems
Posted by gabe NO[at]SPAM geckodesigns.com at 4/21/2004 8:31:39 AM
Hi there - I have created a peice of clothing in Illustrator that
looks 3D because of the gradient meshes I'm using. The artwork is
intended to be used in a Flash application online - specifically the
Flash app will allow the user to change colors on the outfit itself -
like a simple paint tool... more >>
Creating Mouse Movement Animation: Preset Tools Available?
Posted by J. Danniel at 4/21/2004 7:48:03 AM
A question from a complete Flash beginner/novice:
I want to a presentation that demonstrates how a piece of software
works. Specifically, how to move the mouse and click on a button or
open a menu. I want to animate the mouse movement.
I'm assuming the best way to do this is by importing s... more >>
How Do I Align Bitmaps Manually Dragged into Blank Keyframes?
Posted by J. Danniel at 4/21/2004 7:46:41 AM
Hi everyone.
I just began researching Flash, and have a rudimentary question about
aligning imported bitmap images.
I have a series of bitmap images that I want to import to the stage.
As I understand it, Flash will try to determine if a set of images are
similarly named, and if so, will pr... more >>
Is there plugin or converter for svg to flash?
Posted by GG at 4/21/2004 6:52:39 AM
Is there any plugin available that will all a svg to be imported into flash?
What about a program that will convert svg to swf?
Thanks!
... more >>
help with flashplayer
Posted by mistergarret at 4/21/2004 6:51:52 AM
I've made a quik movie on flash mx pro 2004, and when i publish it, how do i
get it to not repeat when i play it on the flash player? I dont want to
manually do this each time i watch the film, i know there's a way to tell the
movie not to repeat once published. Anybody who answers-thanx.
... more >>
collaborating with someone on Flash project
Posted by bizybee at 4/21/2004 5:14:19 AM
What's are the best (and most efficient) ways to conduct business with another
design contractor? I have a partner who
has a Flash design business like I do, and we're thinking about working on a
site for a DJ.
However, this will be the first time that I'll work with someone, and since we
... more >>
gradients
Posted by Eep? at 4/21/2004 4:22:11 AM
Is there a way to have other kinds of gradients like angular (not just horizontal) linear, rectangular, and square-radial?... more >>
import .psp (Paint Shop Pro)
Posted by Eep? at 4/21/2004 4:18:57 AM
Is there a PSP (Paint Shop Pro) importer for Flash? I have some detailed PSP
images I want to animate but I can only save them in PSP as WMF format in order
for Flash to recognize and load them, but this loses layers (and their visible
ordering), flood fills, etc. It's VERY time consuming tryi... more >>
Good online courses
Posted by webxxxcards NO[at]SPAM yahoo.com at 4/21/2004 4:07:24 AM
I am looking for people to recommend good online courses. I am not
talking about the tutorial sites that are plentiful. I want to know if
anyone out there has had experience with a good online site, or
school, that provides extensive training for Flash MX. Thanks!... more >>
Flash does not display
Posted by barleyman007 at 4/21/2004 2:32:48 AM
I have Flash player 7 installed and I know it works because other flash movies
display ok. I have a flash navigation menu that works fine on my machine but
when uploaded to the website, it does not display at all (only the background).
What am I doing wrong that this will not display?
I ha... more >>
Realistic Lighting effects
Posted by brandon at 4/21/2004 1:16:47 AM
Is there a way to make realistic lighting effect in flash ? the idea is the
have 3 spot lights, 1 Red 1 Green 1 Blue shinning on a graphic, moving
and having those colors blend forming other colors in the spectrum. On
mouseover of item selected with cause the 3d rendered spotlights to foc... more >>
Normal VS Expert Mode
Posted by dech at 4/21/2004 12:19:15 AM
I hope this is the appropriate place for this question.
Can one be a good Flash developer and not be programming-savvy enough to work
in the Expert mode? I'm coming to the conclusion that I'll never be a fluent
Actionscripter.
... more >>
Flash external link problem!
Posted by Kaervek87 at 4/21/2004 12:17:54 AM
Ok, the flash site I made works just fine, but when I access it through a
"cjb.net" or "dot.tk" address, the site works, but any links to external
websites do not work.
Anyone have a clue what could be wrong?
Thanks,
Jon
... more >>
|