| Groups | Blog | Home |
iis ftp : How to setup FTP clients
I read this erlier and
I did follow that, but I get error "500 Unrecognized command" after typing myusername or anonymous then ""loging failed"" any Idea? Thanks [quoted text, click to view] >-----Original Message----- ..>On Wed, 14 Jul 2004 10:54:19 -0700, " Sara" <vaio9003@yahoo.com> >wrote: > >>Hi everyone, >> >> I currently using a FTP with my SBS 2000. My questions is how can I >>setup a different folders for different user to login to my FTP server? >>Is it possible. IS setting up a virtual FTP server help? If yes, How can I >>configure that ?? can anyone walk me via. ?? thanks. >> >>Nina > >Nina, > >Follow the steps outlined in these KB articles : > >HOW TO: Create a Secure FTP Directory that Uses Password >Authentication >http://support.microsoft.com/?id=239120 > >How To Set Up an FTP Site So That Users Log Onto Their Folders >http://support.microsoft.com/?id=201771 > > >Regards, > >Paul Lynch >MCSE >. >
Use this
How to Use the FTP Utility in a Typical Session http://support.microsoft.com/?id=240727 Can you login ? if not what's the error msgs ? post your ftp log here. -- Regards, Bernard Cheah http://www.tryiis.com/ http://support.microsoft.com/ http://www.msmvps.com/bernard/ [quoted text, click to view] "hamm" <anonymous@discussions.microsoft.com> wrote in message news:0da801c46e9d$579eeb10$a501280a@phx.gbl... > I read this erlier and > I did follow that, but I get error "500 Unrecognized > command" after typing myusername or anonymous > then ""loging failed"" > > any Idea? > > Thanks > > >-----Original Message----- > >On Wed, 14 Jul 2004 10:54:19 -0700, " Sara" > <vaio9003@yahoo.com> > >wrote: > > > >>Hi everyone, > >> > >> I currently using a FTP with my SBS 2000. My > questions is how can I > >>setup a different folders for different user to login > to my FTP server? > >>Is it possible. IS setting up a virtual FTP server > help? If yes, How can I > >>configure that ?? can anyone walk me via. ?? thanks. > >> > >>Nina > > > >Nina, > > > >Follow the steps outlined in these KB articles : > > > >HOW TO: Create a Secure FTP Directory that Uses Password > >Authentication > >http://support.microsoft.com/?id=239120 > > > >How To Set Up an FTP Site So That Users Log Onto Their > Folders > >http://support.microsoft.com/?id=201771 > > > > > >Regards, > > > >Paul Lynch > >MCSE > >. > > > . > >
Here is what I get no matter what I type at the User
prompt: I get error "500 Unrecognized command, loging failed" Thanks Hamm [quoted text, click to view] >-----Original Message-----
>Use this >How to Use the FTP Utility in a Typical Session >http://support.microsoft.com/?id=240727 > > >Can you login ? if not what's the error msgs ? > >post your ftp log here. > >-- >Regards, >Bernard Cheah >http://www.tryiis.com/ >http://support.microsoft.com/ >http://www.msmvps.com/bernard/ > > > >"hamm" <anonymous@discussions.microsoft.com> wrote in message >news:0da801c46e9d$579eeb10$a501280a@phx.gbl... >> I read this erlier and >> I did follow that, but I get error "500 Unrecognized >> command" after typing myusername or anonymous >> then ""loging failed"" >> >> any Idea? >> >> Thanks >> >> >-----Original Message----- >> >On Wed, 14 Jul 2004 10:54:19 -0700, " Sara" >> <vaio9003@yahoo.com> >> >wrote: >> > >> >>Hi everyone, >> >> >> >> I currently using a FTP with my SBS 2000. My >> questions is how can I >> >>setup a different folders for different user to login >> to my FTP server? >> >>Is it possible. IS setting up a virtual FTP server >> help? If yes, How can I >> >>configure that ?? can anyone walk me via. ?? thanks. >> >> >> >>Nina >> > >> >Nina, >> > >> >Follow the steps outlined in these KB articles : >> > >> >HOW TO: Create a Secure FTP Directory that Uses Password >> >Authentication >> >http://support.microsoft.com/?id=239120 >> > >> >How To Set Up an FTP Site So That Users Log Onto Their >> Folders >> >http://support.microsoft.com/?id=201771 >> > >> > >> >Regards, >> > >> >Paul Lynch >> >MCSE >> >. >> > >> . >> >> > > >.
[quoted text, click to view]
> From: "hamm" <anonymous@discussions.microsoft.com> > > Here is what I get no matter what I type at the User > prompt: > > I get error "500 Unrecognized command, loging failed" Open up a command-prompt window. Type "ftp -d ftp.example.com" (replace 'ftp.example.com' with whatever address you are connecting to. Hit return, and then try to log on. Copy and paste from that command prompt window into your newsreader, so that there are no mis-spellings or mistakes, so that we can see which command is being rejected. Alun. ~~~~
I'm using IIS5 on SBS2000 which is setup as Domain Controller. even if I try to ftp localy iget the error 500 something like this: H:\ftp mymchine connected to mymachine.mydomain.com 220 mymachine.mydomain.com Microsoft ESMTP MAIL Service, Version: 5.0.2195.6713 ready at Friday, 23 July 2004 14:04:04 -0400 Name (myachine.mydomain.com:hamm): hamm ----> USER hamm 500 5.3.3 Unrecognized command Login failed ftp> Thanks Hamm [quoted text, click to view] >-----Original Message-----
>Are you using IIS FTP ? >what's the banner msgs ? > >Pls follow Alun's advise and paste the complete error msgs and response >here. > >-- >Regards, >Bernard Cheah >http://www.tryiis.com/ >http://support.microsoft.com/ >http://www.msmvps.com/bernard/ > > > >"hamm" <anonymous@discussions.microsoft.com> wrote in message >news:22c501c47018$10c13500$a401280a@phx.gbl... >> Here is what I get no matter what I type at the User >> prompt: >> >> I get error "500 Unrecognized command, loging failed" >> >> >> Thanks >> >> Hamm >> >> >-----Original Message----- >> >Use this >> >How to Use the FTP Utility in a Typical Session >> >http://support.microsoft.com/?id=240727 >> > >> > >> >Can you login ? if not what's the error msgs ? >> > >> >post your ftp log here. >> > >> >-- >> >Regards, >> >Bernard Cheah >> >http://www.tryiis.com/ >> >http://support.microsoft.com/ >> >http://www.msmvps.com/bernard/ >> > >> > >> > >> >"hamm" <anonymous@discussions.microsoft.com> wrote in >> message >> >news:0da801c46e9d$579eeb10$a501280a@phx.gbl... >> >> I read this erlier and >> >> I did follow that, but I get error "500 Unrecognized >> >> command" after typing myusername or anonymous >> >> then ""loging failed"" >> >> >> >> any Idea? >> >> >> >> Thanks >> >> >> >> >-----Original Message----- >> >> >On Wed, 14 Jul 2004 10:54:19 -0700, " Sara" >> >> <vaio9003@yahoo.com> >> >> >wrote: >> >> > >> >> >>Hi everyone, >> >> >> >> >> >> I currently using a FTP with my SBS 2000. My >> >> questions is how can I >> >> >>setup a different folders for different user to login >> >> to my FTP server? >> >> >>Is it possible. IS setting up a virtual FTP server >> >> help? If yes, How can I >> >> >>configure that ?? can anyone walk me via. ?? thanks. >> >> >> >> >> >>Nina >> >> > >> >> >Nina, >> >> > >> >> >Follow the steps outlined in these KB articles : >> >> > >> >> >HOW TO: Create a Secure FTP Directory that Uses >> Password >> >> >Authentication >> >> >http://support.microsoft.com/?id=239120 >> >> > >> >> >How To Set Up an FTP Site So That Users Log Onto Their >> >> Folders >> >> >http://support.microsoft.com/?id=201771 >> >> > >> >> > >> >> >Regards, >> >> > >> >> >Paul Lynch >> >> >MCSE >> >> >. >> >> > >> >> . >> >> >> >> >> > >> > >> >. >> > > > >.
Are you using IIS FTP ?
what's the banner msgs ? Pls follow Alun's advise and paste the complete error msgs and response here. -- Regards, Bernard Cheah http://www.tryiis.com/ http://support.microsoft.com/ http://www.msmvps.com/bernard/ [quoted text, click to view] "hamm" <anonymous@discussions.microsoft.com> wrote in message news:22c501c47018$10c13500$a401280a@phx.gbl... > Here is what I get no matter what I type at the User > prompt: > > I get error "500 Unrecognized command, loging failed" > > > Thanks > > Hamm > > >-----Original Message----- > >Use this > >How to Use the FTP Utility in a Typical Session > >http://support.microsoft.com/?id=240727 > > > > > >Can you login ? if not what's the error msgs ? > > > >post your ftp log here. > > > >-- > >Regards, > >Bernard Cheah > >http://www.tryiis.com/ > >http://support.microsoft.com/ > >http://www.msmvps.com/bernard/ > > > > > > > >"hamm" <anonymous@discussions.microsoft.com> wrote in > message > >news:0da801c46e9d$579eeb10$a501280a@phx.gbl... > >> I read this erlier and > >> I did follow that, but I get error "500 Unrecognized > >> command" after typing myusername or anonymous > >> then ""loging failed"" > >> > >> any Idea? > >> > >> Thanks > >> > >> >-----Original Message----- > >> >On Wed, 14 Jul 2004 10:54:19 -0700, " Sara" > >> <vaio9003@yahoo.com> > >> >wrote: > >> > > >> >>Hi everyone, > >> >> > >> >> I currently using a FTP with my SBS 2000. My > >> questions is how can I > >> >>setup a different folders for different user to login > >> to my FTP server? > >> >>Is it possible. IS setting up a virtual FTP server > >> help? If yes, How can I > >> >>configure that ?? can anyone walk me via. ?? thanks. > >> >> > >> >>Nina > >> > > >> >Nina, > >> > > >> >Follow the steps outlined in these KB articles : > >> > > >> >HOW TO: Create a Secure FTP Directory that Uses > Password > >> >Authentication > >> >http://support.microsoft.com/?id=239120 > >> > > >> >How To Set Up an FTP Site So That Users Log Onto Their > >> Folders > >> >http://support.microsoft.com/?id=201771 > >> > > >> > > >> >Regards, > >> > > >> >Paul Lynch > >> >MCSE > >> >. > >> > > >> . > >> > >> > > > > > >. > >
Errr.. this looks like SMTP services to me.
Check your ftp ip/port binding is it 21 ? Do you change SMTP to listen on port 21 ? -- Regards, Bernard Cheah http://www.tryiis.com/ http://support.microsoft.com/ http://www.msmvps.com/bernard/ [quoted text, click to view] "hamm" <anonymous@discussions.microsoft.com> wrote in message news:305501c470e3$710979b0$a301280a@phx.gbl... > > I'm using IIS5 on SBS2000 which is setup as Domain > Controller. even if I try to ftp localy iget the error 500 > > something like this: > > H:\ftp mymchine > connected to mymachine.mydomain.com > 220 mymachine.mydomain.com Microsoft ESMTP MAIL Service, > Version: 5.0.2195.6713 ready at Friday, 23 July 2004 > 14:04:04 -0400 > Name (myachine.mydomain.com:hamm): hamm > ----> USER hamm > 500 5.3.3 Unrecognized command > Login failed > ftp> > > Thanks > > Hamm > > > >-----Original Message----- > >Are you using IIS FTP ? > >what's the banner msgs ? > > > >Pls follow Alun's advise and paste the complete error > msgs and response > >here. > > > >-- > >Regards, > >Bernard Cheah > >http://www.tryiis.com/ > >http://support.microsoft.com/ > >http://www.msmvps.com/bernard/ > > > > > > > >"hamm" <anonymous@discussions.microsoft.com> wrote in > message > >news:22c501c47018$10c13500$a401280a@phx.gbl... > >> Here is what I get no matter what I type at the User > >> prompt: > >> > >> I get error "500 Unrecognized command, loging failed" > >> > >> > >> Thanks > >> > >> Hamm > >> > >> >-----Original Message----- > >> >Use this > >> >How to Use the FTP Utility in a Typical Session > >> >http://support.microsoft.com/?id=240727 > >> > > >> > > >> >Can you login ? if not what's the error msgs ? > >> > > >> >post your ftp log here. > >> > > >> >-- > >> >Regards, > >> >Bernard Cheah > >> >http://www.tryiis.com/ > >> >http://support.microsoft.com/ > >> >http://www.msmvps.com/bernard/ > >> > > >> > > >> > > >> >"hamm" <anonymous@discussions.microsoft.com> wrote in > >> message > >> >news:0da801c46e9d$579eeb10$a501280a@phx.gbl... > >> >> I read this erlier and > >> >> I did follow that, but I get error "500 Unrecognized > >> >> command" after typing myusername or anonymous > >> >> then ""loging failed"" > >> >> > >> >> any Idea? > >> >> > >> >> Thanks > >> >> > >> >> >-----Original Message----- > >> >> >On Wed, 14 Jul 2004 10:54:19 -0700, " Sara" > >> >> <vaio9003@yahoo.com> > >> >> >wrote: > >> >> > > >> >> >>Hi everyone, > >> >> >> > >> >> >> I currently using a FTP with my SBS 2000. My > >> >> questions is how can I > >> >> >>setup a different folders for different user to > login > >> >> to my FTP server? > >> >> >>Is it possible. IS setting up a virtual FTP server > >> >> help? If yes, How can I > >> >> >>configure that ?? can anyone walk me via. ?? > thanks. > >> >> >> > >> >> >>Nina > >> >> > > >> >> >Nina, > >> >> > > >> >> >Follow the steps outlined in these KB articles : > >> >> > > >> >> >HOW TO: Create a Secure FTP Directory that Uses > >> Password > >> >> >Authentication > >> >> >http://support.microsoft.com/?id=239120 > >> >> > > >> >> >How To Set Up an FTP Site So That Users Log Onto > Their > >> >> Folders > >> >> >http://support.microsoft.com/?id=201771 > >> >> > > >> >> > > >> >> >Regards, > >> >> > > >> >> >Paul Lynch > >> >> >MCSE > >> >> >. > >> >> > > >> >> . > >> >> > >> >> > >> > > >> > > >> >. > >> > > > > > > >. > >
Don't see what you're looking for? Try a search.
|
June 2004
July 2004
August 2004
September 2004
October 2004
November 2004
December 2004
January 2005
February 2005
March 2005
April 2005
May 2005
June 2005
July 2005
August 2005
September 2005
October 2005
November 2005
December 2005
January 2006
February 2006
March 2006
April 2006
May 2006
June 2006
July 2006
August 2006
September 2006
October 2006
November 2006
December 2006
January 2007
February 2007
March 2007
April 2007
May 2007
June 2007
July 2007
August 2007
September 2007
October 2007
November 2007
December 2007
January 2008
February 2008
March 2008
April 2008
May 2008
June 2008
| home · blog · groups | Questions? Comments? Contact the dn |