Got Win2000 DC running IIS Got Linksys dsl/cable router Web server is working properly Locally on DC using IE to log onto FTP site give error Make sure you have permission to access that folder .... Entering Passive Mode....... Connection closed, transfer aborted. Using FlashFXP remotely...more >>

I want to create a SSL encrypted FTP site with IIS Is this possible? If not is there any freeware ftp server softwares out there to do this?...more >>

Our ftp servers are hit heavily by the our user community. When we used IIS 4 (NT4) and IIS5 (Windows 2000), we ran into the limitation of 100 current connections on these servers. We only learned of this after seeing failures then troubleshot and consulted for many weeks with going up the c...more >>

Hi. I configure ftp site isolated (w/o AD). I create de dir localuser in te root directory. I don't have problem in public access, but i can't log validated users. Per uuser i create a dir, ej for user xxx the dir is w:\inetpub\localuser\xxx. Tnks. ...more >>

HI, In my server i have a lot of web's, all with one ip. For this i am using virtual dir. There is another solution.? I need a root dir per user. Tnks ...more >>

I have an ftp account to the root folder of the website. User setup to access via the iis properties and permissions to folder. A second user is setup to view the folder via http - no anonymous access for either. The second user does not appear in the ftp iis properties, yet that user is stil...more >>

If I shut down almost everything else is NT 4.0 (fully patched) secure enough to run FTP and www on one box that has no other job function. I have it in a DMZ with firewall on each side. I can access it from inside net via FTP if that is necessary to maintain security I thought about blocking...more >>

Hi, I have a FTP server setup on my SBS 2000 server, and I tried to connect to my server ourside of the network and it works perfectly. However, when those MAc clients tried to connect to my FTP site, and it came out an error message said " The finder cannot complete the operation because ...more >>

I'm trying to find out if IIS FTP server can be used to ftp IBM variable length files and if there is any special requirements for the ftp process to retain the record descriptor word (RDW). With FTP client where you are required to enter a site command (SITE RDW). Does anyone know the an...more >>

Hi, I enabled IIS default ftp server. When a user connectes to the server he gets authenticated and can list the directory, but in some few seconds (maybe 10 to 30sec) he is disconnected. I extended the inactivity timer to 800 sec and nothing changed. It seems the problem is somewhere else. Ca...more >>

I have a windows 2003 webserver with 1 external IP. I have 4 websites on this server using host headers (IIS6) and it works fine. I can't figure out how to setup 4 ftp sites for these users to manager their sites (like ftp.domain1.com, ftp.domain2.com and so on). I have got some tips about ...more >>

I'm trying to setup default ftp site using an alternate port on IIS 6.0. I did specified PassivePortRange which works just fine when used w/ port 21. but as soon as i change the port, passive port number is issued other than specified in range. PLEASE HELP...??? -- MS...more >>

I recently transferred old FTP data to the MS2003 server and set up the FTP client I am attempting to load WS FTP Pro Server on the machine but everytime i do it seems to disable my FTP client already in use I didnt see an option making WSFTP Pro the default FTP client during the custo...more >>

Since FTP is not recommended on SBS 2003 I thought I'd run it on the legacy hardware, still running NT 4.0 I followed the steps PRECISELY on http://support.microsoft.com/default.aspx?scid=kb;EN-US;201771 . I can log in as anonymous and can only see root folder ( that's what I want there )....more >>

hi, i want to configure my ftp server permission something like this / (root) R-X /pub RWX but i always bumped that i must set RWX to the root (using permission wizard) already tried with cacls/folder security :-( i'm using win2k and iis 5 (patched) thanks in advance ...more >>

Hi, I have to write a program for setting an FTP site programmatically in VC++ for Windows 2000 machines. But the security setting fails for setting password. I done this part as follows, I created a user in local system Set UserIsolationMode = 2 , ADConnectionsUserName = domin/us...more >>

Hi I'm Andrea from Italy. I have a Machine with W2K Server (IIS 5.0). On this machine there are two Asp site, and there is a default FTP site with three Virtual Directory. I have a big problem with the FTP becuase there are some ip that open a lot of port with the passive mode. How to define the ...more >>

How do i setup www or http service in iis 4 ? Pls advise. Thanks Rgds Daniel *** Sent via Developersdex http://www.developersdex.com *** Don't just participate in USENET...get rewarded for it!...more >>

hello all, I have an IIS6 FTP server that I want to create a virtual directory across domains. I have the proper domainname\username and password and I can map a drive when properly connecting. I can even right click on the virtual directory and click explore and create new files. But when I ...more >>

I installed the FTP service on one of my Windows 2003 Standard servers. I can log into it from a command line (CMD) but as soon as I try to transfer a file or do a listing, it hangs. If I try to connect to it with a web browser, I get a window with the waving flashlight for 20 minutes and then t...more >>

Hello, Who knows the address of ftp server from Microsoft, for upgrading MS Office 2000 with Service Pack 1a and SP3 , without to suffer the automatic procedure with htm ? Many thanks B ...more >>

I thought you guys might now about a FTP problem I have where a file/folder name contains Chinese Characters. Now I cannot upload these to a ftp server I get error something along the lines off: 550 File name ?????: The filename, directory name, or volume label syntax is incorrect. (The FTP ...more >>

I need to move my FTP Server (IIS 5.0 running on Win2000/SP4) to another machine. I want to preserve the FTP Sites and Virtual directories with all their attributes, local user accounts, and NTFS file permissions on folders to which FTP Virtual directories point. I tried to backup metab...more >>

I have never set up ftp-sites before, and have some basic questions to get started. I have a Windows 2003 server / IIS 6, and run all websites on a single IP using host headers to direct traffic. The structure on my server is like this: c:\Inetpub\wwwroot\domain1 (this is www.domain1.com) ...more >>

I have a problem with users initiating multiple FTP downloads of the same huge file, or several huge files, at the same time. I would like to restrict the number of times a single user can log in via FTP (to prevent users from monopolizing the bandwidth) without necessarily restricting the overa...more >>

I am running IIS6 on Serv2003. I have 25 or so webistes and one FTP site reachable from the outside world. Can I have multiple FTP sites also reachable from the outside world? When I try and install a second site, it comes up "stopped" and says I can only have one site on my IP/Port spe...more >>

Running a Win2k (SP4) IIS 4 FTP server behind a Linksys router (or trying to). LAN IP address of server is 192.168.1.5 LAN IP of router is 192.168.1.1 LAN IP of my PC is 192.168.1.2 First of all, I thank you for your time and effort. Now, I set up IIS and have gotten it to the stage where I...more >>

I want to set up several FTP sites on IIS 6. Is there any reason to keep the Default FTP Site? Can I delete it and re-create it at will? ...more >>

Windows SBS 2003 Sever running ISA 2000 sp2 and IIS 6. Have set up the FTP server as per microsoft knowledge base, also double checked against acticle on isaserver.org. Anyway, when accessing the FTP site via IE6 (fully updated and ftp folder view enabled) I get the following error. FTP Fol...more >>

I did ten critical updates through windows update on 9/9/2004 and ever since then we have had problems with ftp. As of about three days ago ftp is completely down. In Internet Services Manager the sites show stopped and when I try to start them I get an alert saying that the Address is a...more >>

HELLO, one of my client use my ASP application on a 2003 Server with Netware 6. I use the FTP Service of IIS for uploading file. Connections are anonymous. Sometime, but not each time, an error occured : Control channel closed... Is somebody have an idea to solve this kind of problem. ...more >>

Is it possible to change the paths for the user home directories when setting up an FTP server using user isolation mode without active directory? We have an FTP server with dozens of existing users setup using a different directory structure (x:\blablabla\homepages\<user's customer number>)....more >>

Infos: - Server side: Windows 2003 server web edition - Client side: Windows XP SP2, IE 6 Trying to download a file from the client with IE, the download freeze everytime at 84.2 MB withtout error message, without reason. Any idea why ?...more >>

Dear all we have started the ftp server on W2k , how does one access our ftp site. regards Eashwar ...more >>

Dear all, I'm configuring a FTP site w/ Windows 2003 server (IIS6.0). It contains a Default FTP site already. However, I have to configure another FTP site on the same server. Therefore, I chose to use a port 9999 for that purpose. This server is behind ISA2000, I have published the server ...more >>

When trying to login to the FTP site from an external source, I get the Error: "An Error Occurred opening that folder on the FTP server. Make Sure you have permission to access that folder. Details: The Connection with the server was reset." But I am still able to Login internally, as wel...more >>

I set up FTP server on windows 2003 server using IIS ver.6.0. I di not allow anonymous connection so everything is based on username and password. I added all the accounts to my FTP home folder so whoever is accessing my ftp has a full permission. Everything seems to be working fine when i t...more >>

We have a site that one of our library members requires access to. You can only access this site and download the contents if you bypass the proxy server. When i have a look in ISA and check the protocol definitions there are the following in there: FTP Download only Gopher Http Https...more >>

Hi, I'd like to get FTP to authenticate using a Microsoft SQL table. I want to do this because we have a web site that inputs username/password to a SQL table. It would be great if I can used use that information to have our web users login to an FTP server. I have been able to get a databa...more >>

Hello all We just upgraded our ftp server to IIS6 on 2003 from IIS5 on 2000. We have a webcam that uploads an image with a .tmp extension. The file is then renamed to the file name used on the website. We are getting the following error messages in the log files. --- [724]USER XXX 331 ...more >>

Hi, I have to type domain name\user name to log in to my FTP server. How can I get rid of the domain name? How can I set the default domail name so users don't have to type it when log on? Please help, Thanks in advance! Lisa...more >>

Is their a way to remove the "Save password" check box from the login screen? ...more >>

I'm coming from an Apache background, so excuse my ignorance if this is a simple question: I'm trying to set up a sandbox server - WS03/IIS6 to which I will FTP my ASP.NET code from VS.NET or Dreamweaver.. so, on the server, I created an FTP site and a Web site called "boyjojo" and a director...more >>

I have installed iis6 on a 2003 standalone server. I am attempting to allow users to upload files to their folders on the web server. I have assigned the users full control rights to their individual folders but they are unable to upload any files. the error message error 550 access is denied ...more >>

I have my FTP site set up and working but I cannot configure it to ask for a username and password. I have a FTP user set up for that directory and Allow Anonymous Access checked with the FTP username and password I set up. Howerver, when I put the FTP address in my browser I have instan...more >>

Hi, Using IIS6 I setup FTP users so they are restricted to there own FTP root (defined in user profile + using the FTP server configuration wizard) so they cant access other peoples DIR by going back through the directory structure. I need to setup each user root within there own ftproot DI...more >>

Hi, Using IIS6 I setup FTP users so they are restricted to there own FTP root (defined in user profile + using the FTP server configuration wizard) so they cant access other peoples DIR by going back through the directory structure. I need to setup each user root within there own ftproot...more >>

Hi i'm using iis6.0 on windows 2003 server. i'm built over 12 ftp sites using the isolation without AD option. i checked all the permissiom for the files i need to have access to. what should i need to do to fix the login failure problem? i've created a LocalHost\public under the home direct...more >>

Windows 2000 Adv Server running IIS 5.0 with all the patches. when uploading serveral small files I get the message Connection Closed by remote host. I have tried with multiple clients and still get the same intermittant error. the server has minimal traffic and the connection closeing ...more >>

I'm having a very hard time connecting to 2 of these 3 program. I can only connect to FTP Surfer but can't with CoffeeFTP or SmartFTP. For SmartFTP, it kept saying this... What does this mean and what can I do about it? Any clue?? I would like to use CoffeeFTP. Is there a better program then ...more >>