Howdy! I need to create virtual folders under isolated mode FTP server (IIS 6). MMC does not show ANY folders under the isolate root folder! Thanks! ...more >>

I have setup a Win 2003 server with IIS FTP. I have configured the site to allow Read and Write Access. The server is located on the same subnet that I am doing this test, so there should be no firewall issues. I am logging into the site using a domain user account. I have also made certai...more >>

Can I setup my website in the same box that I have exchange and is there a guid to see how to install IIS6 and how to setup my website as well as my FTP Server. Thank You ...more >>

Folks, I'm confounded by some problems with MS FTP and especially using IE. Try this as an experiment: 1. Set up an Active Directory user account that is greater than 20 characters (up to 30 characters), not including the UPN suffix. For example (e.g., christopher.abbazabba123456789@my...more >>

Is there any way to configure my FTP server (IIS 6.0, W2003, behind RRAS Basic Firewall) to allow both passive and active connections? What I am looking for is user access regardless of IE settings. Thanks, Amanda ...more >>

Hello. I have an FTP server set up on a w2003 machine. There are 2 NICS one internal and one external. The external is using the RRAS firewall and allows FTP access. The issue is when people try to get access to our FTP server sometimes it doesn't work. For example at home I have to disable...more >>

Hi. I have an IIS6 with FTP working service. Folders inside ftp's rootfolder are accessible through ftp respecting its NTFSs rights, but *that* folder, added as virtual folder to FTP service, let me PUT,RENAME,GET files but not DELETE files or folders. I've been trying with dedicated user w...more >>

Hello, we are having the following problem with IIS running on Windows 2003 Server: each time we place files on the FTP site, its attributes (creation date etc..) are changed to the current date. But we want our files to retain their original attributes when we copy them to the FTP site. ...more >>

Is there a way to drop the domain name and just use username for authentication. I have Win2K member Server running ftp services. I have no problems loging into ftp site if i use DomainName\UserName. I know that by promoting the server to a dc would fix that, but i don't see a reason for an...more >>

I need to set up a central instance of FTP, that can be used to set up multiple FTP sites on remote servers via UNC paths. Can anyone tell me the difference between creating a New FTP site for each UNC path, or creating virtual directories to each UNC path. The example that I have looked at ha...more >>

Hello: After many months of successfully running an automated nightly job using FTP, we are now experiencing the following error listed below: “ftp: get :No buffer space is supported” Note from the information cut and pasted below from an attempt to log into the FTP session maunua...more >>

Here is what I did: 1) Created the followign security groups FTPGuests FTPPowerUsers FTPSuperUsers 2) Added the user FTPguest to the FTPGuests security group 3) Under the security tab for the FTPSuperUsers folder I assigned "Full Control" to the FTPSuperUsers security group and UNch...more >>

I install FTP server on Windows 2000 professional.I want to set up TCP access restriction,butt all options are grayed.I'm logged on Windows as local administrator.What to do? ...more >>

I have an IIS FTP server on a Windows Server 2003 EE box. We have a number of clients that all log into the FTP server using the exact same username and password. On one particular clients network there are two computers from which they receive "550 Access is denied" errors when executing 'get...more >>

Got Win2k Server SP4 running IIS FTP Got linksys BEFSR11 router doing NAT I setup up ports 20,21, 5500-5550 to forward to the IIS server I edited registry as outlined at http://support.microsoft.com/?id=555022 FTP clients such as flashfxp work, but IE is not working. I now have 2 offic...more >>

Can someone please help me. I have a ftp which is accissble to fiew users. I need to create a folder in the ftp that will be accissble to anyone, with permision to read and to write but not delete, and will be accissble for fiew users with permission full controll. How is this done? ...more >>

where do you grant the user ftp login permissions in w2k. regards cd ...more >>

I found out that IIS will return its private IP when it responses to PASV mode, instead of using its public IP address. However, it just happens to one of my client site only. I have another IIS FTP server in another site, and it can return the correct public IP in responding to PASV command, ...more >>

I've successfully set up the FTP server with user isolation, and I'm using virtual directories to allow the users to get into the areas I want them to. Problem I've got is no matter how few permissions I give the users (they belong to no groups) they can still access the other virtual directories...more >>

Hello, I am trying to write an automated batch job that logs into an FTP server and copy entire directories to another location, however I am finding it very difficult to use the command line to copy entire directories! I have something like this: mget \favorites\*.* -I This will get...more >>

Can we set up a script so that client services could easily setup and remove customer FTP sites on the FTP server? This would have to create a directory with the correct security so only that customer, and client services staff could access it and set up the user and password in the system. A ...more >>

Hi all, I am new to ftp. I would like to know if there is such command to upload all files within the directory then delete them? Thanks in advance....more >>

I am setting up a new ftp server on a windows 2000 box. Is there a way to give users a private directory and jail them to that directory? thanks cr ...more >>

I have configured FTP service on IIS 6.0, and I can connect to it by PORT mode. However, if I connect by PASV, I will be stuck on the "PASV" command. What is strange is that, if I change the listening port from 21 to something else(I tried 22 and 5000), I will get a message of "Private IP a...more >>

I have a few questions regarding the new FTP user isolation modes introduced in Windows 2003 Server / IIS 6, specifically with the "Isolate users" mode, rather then the "Isolate users using Active Directory" mode. I would like to set up anonymous access on my FTP site, however, I do not wish a...more >>

hi, I want to host a ftp server : My config : WinXPprof, IIS 5.1, router -> redirecting to specif computer is taken care of, I use port 8250 instead of 20 or 21, (20,21 are blocked by isp). Port 8250 is allowed by router. On the computer itself everything works properly. (login, listing of f...more >>

Hi, I am trying to set up an FTP server on a Win XP SP2 machine that has the firewall disabled. Our router has been set to forward port 21 to this machine. The FTP site is set to accept only anonymous connections using the following account: MACHINENAME\IUSR_MACHINENAME and IIS is set to...more >>

Anyone have best practices on configuring an externally facing FTP server built on Windows 2003 Server / IIS 6.0?...more >>

Above are the usual error codes when trying to connect... I have set up an FTP site under the default in IIS 6.0. Allow anonymous is checked, and I have set up two users in their own directories as per KB 201771 and KB 555018. None of the accounts is able to connect via an FTP client or b...more >>

I am trying to do the following: Have a bunch of users have their own "root" directories when logging in with FTP The user can only access the files in "his" path, neither espace that path or access files in other areas I have played a bit, but I only see a general "ftproot", altering the...more >>

hi I am facing problem with IIS6 Which is insatalled in windows 2003 server. I configured FTP i iis6 but i can not access to that FTP server. All Services related to FTP aare started. i did all RND related to that but Not getting access to server. Anyone having Idea about this plz ma...more >>

Hello I am wanting to web enable our default ftp site with iis 5.0. Right now(with enable folder view with ftp sites enabled in the browser)i am able to bring up the ftp site in the browser with a corresponding login prompt. But after i put in the authentication info, i get a browse flash...more >>

Hi, I want to create TWO ftp sites on a single box with ONE nic. I do not want multiple virtual directories on ONE ftp site. I have XP PRO SP2 running IIS 5.1. I can get the first site running. However when I create the second site using the same IP, but a different port and continue foll...more >>

It might be a simple question for the expert. Pls help this beginner. :( I have IIS 5 FTP running on W2K. From a W2K client, I did the following: ================= 230 User sprintsi logged in. ftp> cd data 250 CWD command successful. ftp> debug Debugging On . ftp> trace Packet tracing On . ...more >>

I want to set up an FTP site for clients to access. What I am curious of is if I can set username and password that can expire. For example, let's say I have a client that I want to have a one time access, can I set up logon credentials that will expire so I will not have to go into the IIS ...more >>

I have a Windows 2000 pro machine running ftp services. All pc's on our local LAN can connect and view the ftp directory. I have forwarded ports 20, 21 from our router to the ftp server, but I cannot connect to it from the the outside. Anonymous logins have been enabled. When I try to connect fr...more >>

I've opened a command line ftp session and from the command line tried to connect to the remote ftp site, but I'm not prompted for a user name or password? It just immediately denies me access and closes? I'm not sure why this is happening or how to correct it? Any help is appreciated. Tha...more >>

Hello, I was using IE to access an FTP site and I checked the tick box that saves the password. Where can I go to remove the password? I looked all over = ) Thank you Joe...more >>

Hi all, Are there any FTP command to download everything in the folder? just like the good old "copy *.* x:\" . Thanks in advance....more >>

Hi all, I setup my ftp on a W2K3 server using IIS 6.0. I chose for "Do not isolate..." during the ftp site creation wizard. I disabled "anonymous..." so every one has to provide a valid username|password. Now here comes the strange part, when i connect to the ftp server and logon with th...more >>

ok, i've read several posts in this group, i've read several articles online, and i still cannot get a user to write to a folder via FTP - getting 550 permission denied error. FTP logs are not very helpful - when trying to write a file, i get <ip filename> 550 2; when trying to create a dir i...more >>

I have just created an isolated mode FTP site and after i did i changed the user to the account i have created to logon to the site and i have a home directory created under the ftp root created for this user but i still get a logon failure anytime i try to logon to the site. Please can anyon...more >>

Hei. We have som problem with å program that transfer and deleting files through FTP. When deleting files the program looks for sucessfull deleting. when we just it on 5.0 we looked for code in range 200 - 299 when we moved the ftp on NT to 2003 and iis 6.0 we are not abel to delete files. ...more >>

Hola, si alguien puede darme una ayuda en mi idioma me haria un gran favor. necesito respaldar mis archivos en la red?, yo uso el maletin de Yahoo, que me da 30 MB pero me deja subir de 5 MB y tengo que respaldar unos archivos que comprimidos y todo, superan ese tamaño, me recomendaron Lycos y...more >>