Hello, I have just installed FTP on IIS 6.0 (Windows 2003) and attempted to create a new FTP Site. I point the new FTP Site to an existing Web Site's physical root directory, apply the required IP address/port (21) and choose not to use FTP User Isolation. When attempting to start the new FTP...more >>

I have been looking for a product that will analyze FTP logs and have had no success. Other than creating an ODBC connection or DTS to sql server and building reports, Can anyone suggest something that will give me lots of pretty graphs about the file transfers we get on a nightly basis? T...more >>

I recently reinstalled Win 2003 web server on a computer and of course the FTP site that I had setup went away with it. Anyway, I set it up again but am having the same problem that I had when I first installed it about 6-8 months ago and I can't remember the solution. Using ftp.exe from an...more >>

Hello everyone, I have an issue concerning ftp. I have 2 ftp servers in my DMZ both NLB on their NICs,my question: what is the maximum ftp load for the servers, each. what would the load be when they where standalone ftp servers thanks for the comments...more >>

Hi folks, Right now we have our agency website sitting on an IIS 6.0 server (on Windows 2003 server Standard Edition). We also have other websites (all using same IP as main site) sitting on the same server but using virtual directories. We have separate individuals maintaining these vari...more >>

Hi All, Right now we have a proxy server which has enabled NTLM Autentication Enabled for all Internet Website. Normally all the users must be logged into the domain. But whenever the user try to access the intranet website it does not go thorugh the proxy because we have added an exception i...more >>

Is is possible for the Windows FTP server to call a server side program that would decide if the FTP connection is to be accepted or rejected? The FTP server side program would be passed parms such as user name, password, IP address of the client, type of access ( put or get ) and the director...more >>

Hi, Is there ANY way to force the IIS FTP to always send another IP-address than the one configured on the machine? Some FTP clients just ignore the IP sent to the client and use the IP it connected to. These servers are on a private net and are using NAT and the servers must have its own i...more >>

Hey i am doing a PPS study on various network applications.. Got some doubt relating FTP.. When i lower the available bandwidth, how does FTP adjust to it??.. Does it reduces the packet size below the MTU?? or will it increase the interpacket delay??.. What impact does opeining many FTP sessi...more >>

I run IS 6 and FTP in isolation mode. Now if someone uses IE7 and goes to our FTP site then instead of being prompted for a username/password they get a list a of our entire ftp directory like below: FTP root at local-ftp 08/22/2006 01:03PM Directory Folder1 10/24/2006 02:38PM Di...more >>

Hello Friends, I would like to replicate files from my net server to local mechine without actualy downloading all the files everytime. Can you suggest a way? Thanks in advance Raj ...more >>

Is the following scenario possible? If so, how do I setup? I have an FTP site setup that allows anonymous access. I only want the anonymous user to be albe to read the folders on the FTP site. However, I want a few users to be able to read/write to a certain folder within the FTP site....more >>

Hi, I have created a site with Isolate Users Mode. Everything works fine, the users are redirected to their folders. I want to give one user (ftpadmin) access to the root level. So he can update/delete files from all the user directories. How can i do that? I tried to add a virtual dire...more >>

Hello, I just recently moved an ftp server (the physical hardware) to a new location, and it appeared to be working correctly user were able to log in and I was happy. However, when I was asked to setup a new user to access our ftp site, I cannot get them to log in, I am getting a "530 user ...more >>

In my ftp folder I have a directory with no name (I can't delete it by the way) and in it a bunch of files that start off as %# Tag Aux. I think I've been hacked in some way. The files are easily deleted but the directory won't delete at all. It reads this when I try to delete it: Cannot de...more >>

I can see from the logfiles that there are evil peoble trying to get access to out ftp server (W2003), and I am suprised that they are able to try a new password so fast, I would have expected that the windows security system would increase the delay every time a wrong password were given. I ...more >>

Here's what I've done: - setup the AD isolated FTP site - set for a test user FTPRoot as \\server\users - set for a test user FTPDir as 'username' - Everyone has RX access to \\server\users - Test user has Change access to his 'username' directory but the user when logged into the site can s...more >>

I have an IIS 6 FTP Site set up to use user isolation mode. I have created the following directory structure:- <drive> - ftproot - LocalUser - User1 - User2 - User3 I have then checked the Read / Writ...more >>

I am setting up an AD FTP site that isolates users. I need to run a script for every username on network iisftp /SetADProp /username FTPRoot path iisftp /SetADProp /username FTPDir path that's fine but does that mean for every subsequent new user that I create, I also need to run this scr...more >>

I have a default FTP site which allows win2003 active directory users to access their documents externally. The FTP site home directory is \\server\users\ (where 'server' is not the same server as the FTP server) and after prompting for their username and password it directs them to the corr...more >>

I got this error message from time to time in ftp using a network share.When this happens I can nor open any network connection to this remote system. When I try doing it in windows explorer at this moment the same error message appears. I searchend the internet and found that this can happen ...more >>

Hi, I have a FTP Server on W2K3 SP1. I'm behind a firewall (Router) and I was using default port 21. All was fine. Some times ago, I notice that I was victim of attack. So I decide to change the port of my FTP Server. When I change the port for any other port than the default, the clien...more >>

Hello All, I have Win2K Server with IIS 5.0, and I need each Active Directory user in the domain to be provided with an ftp folder for which he/she should only have access. How do I do that? Thank you. ...more >>

Win2003 server with a single IP address. I already have an FTP site which redirects users (using AD authentication) to their home directories on port 21. I want to set up another FTP site on port 22 to allow anonymous access to a folder which will be the same for all users. It works from with...more >>

Hi. We have a problem with the IIS FTP server running on Windows XP. Not sure if this is a problem inherent with all FTP servers... A large file is being written by a trading partner to our FTP server. We have a polling routine that checks for any new files on the FTP server. When it finds ...more >>

I'm charged with installing a FTP site at a local company. They what to have the public add photo files to this site. They will then process the photos. I want to setup FTP using Windows 2003 Web Edition, but I'm concerned with security. The server will be attached to a Sonicwall Firewalls DMZ...more >>

I have customers that use our server for a storage device and it would be nice if I could allow them to change their own passwords. How? These users are ftp users only, no OWA, etc. ...more >>