| Groups | Blog | Home |
iis ftp : FTP local & remote problem
FTP://srv1/swiff but when I try ftp://80.5.54.164/swiff the login fails. This ftp directory is the same as a web virtual directory which works fine so I presum all mt permissions are set right. Cheers SteveW
Try connect to the ip via ftp.exe at command prompt. post the output here.
-- Regards, Bernard Cheah http://www.iis.net/ http://www.iis-resources.com/ http://msmvps.com/blogs/bernard/ [quoted text, click to view] "stevew" <stevewarby@btinternet.com> wrote in message news:%23m7mm7jFHHA.3616@TK2MSFTNGP02.phx.gbl... > We have IIS6. I have set up an FTP server. I can access it locally by > FTP://srv1/swiff but when I try ftp://80.5.54.164/swiff the login fails. > > This ftp directory is the same as a web virtual directory which works fine > so I presum all mt permissions are set right. > > Cheers > > SteveW >
I have un ticked the allow anonymous users in IIS. I can login via ftp.exe
via a user account. This works for srv1 or 80.5.54.164. srv1/swiff or 80.5.54.164/swiff give unknown host error. Once logged into srv1 I can run cd swiff I then do dir and gt the directory listing When I do the same with 80.5.54.164 I can run cd swiff but when I do dir I get: 500 Invalid port command 150 Opening Ascii mode data conection for /bin/ls The dos box just then hangs. I cannot log in using IE. Both logins fail ie on ftp://srv1 or ftp://80.5.54.164 Cheers SteveW [quoted text, click to view] "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message news:%23ggPoi4FHHA.3616@TK2MSFTNGP02.phx.gbl... > Try connect to the ip via ftp.exe at command prompt. post the output here. > > -- > Regards, > Bernard Cheah > http://www.iis.net/ > http://www.iis-resources.com/ > http://msmvps.com/blogs/bernard/ > > > "stevew" <stevewarby@btinternet.com> wrote in message > news:%23m7mm7jFHHA.3616@TK2MSFTNGP02.phx.gbl... >> We have IIS6. I have set up an FTP server. I can access it locally by >> FTP://srv1/swiff but when I try ftp://80.5.54.164/swiff the login fails. >> >> This ftp directory is the same as a web virtual directory which works >> fine so I presum all mt permissions are set right. >> >> Cheers >> >> SteveW >> > >
We are using sbs 2003
http://support.microsoft.com/?id=281193 say's it is for NT4 & 2000. I do not understand where I apply the command. I have change the explorer setting and I just get a page cannot be displayed error. From Firefox I get the login screen and error: 426 connection closed From IE6 I get: An error occured opening that folder on the FTP server. Make sure you have permission to access folder Details 200 Type set to A 227(entering passive mode)(192.168.0.1,97,52) 426 connection closed; transfer aborted Hope this helps Cheers SteveW [quoted text, click to view] "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message news:eR5PNYQGHHA.1080@TK2MSFTNGP05.phx.gbl... > when you use ftp.exe, just specify the host or ip name. > > This looks like NAT + ftp passive mode issue since you able to access via > ftp.exe active mode. > > Are you binding the site other than port 21? > FTP Error: 500 Invalid PORT Command > http://support.microsoft.com/?id=281193 > > also if you make IE becomes active mode, does it works? > How to configure Internet Explorer to use both the FTP PORT mode and the > FTP PASV mode in the Windows Server 2003 Family > http://support.microsoft.com/?id=323446 > > -- > Regards, > Bernard Cheah > http://www.iis.net/ > http://www.iis-resources.com/ > http://msmvps.com/blogs/bernard/ > > > "stevew" <stevew@parkforce.com> wrote in message > news:uCU1vqJGHHA.1264@TK2MSFTNGP03.phx.gbl... >>I have un ticked the allow anonymous users in IIS. I can login via ftp.exe >>via a user account. >> This works for srv1 or 80.5.54.164. >> srv1/swiff or 80.5.54.164/swiff give unknown host error. >> Once logged into srv1 I can run cd swiff I then do dir and gt the >> directory listing >> When I do the same with 80.5.54.164 I can run cd swiff but when I do dir >> I get: >> 500 Invalid port command >> 150 Opening Ascii mode data conection for /bin/ls >> >> The dos box just then hangs. >> >> I cannot log in using IE. Both logins fail ie on ftp://srv1 or >> ftp://80.5.54.164 >> >> Cheers >> >> SteveW >> "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message >> news:%23ggPoi4FHHA.3616@TK2MSFTNGP02.phx.gbl... >>> Try connect to the ip via ftp.exe at command prompt. post the output >>> here. >>> >>> -- >>> Regards, >>> Bernard Cheah >>> http://www.iis.net/ >>> http://www.iis-resources.com/ >>> http://msmvps.com/blogs/bernard/ >>> >>> >>> "stevew" <stevewarby@btinternet.com> wrote in message >>> news:%23m7mm7jFHHA.3616@TK2MSFTNGP02.phx.gbl... >>>> We have IIS6. I have set up an FTP server. I can access it locally by >>>> FTP://srv1/swiff but when I try ftp://80.5.54.164/swiff the login >>>> fails. >>>> >>>> This ftp directory is the same as a web virtual directory which works >>>> fine so I presum all mt permissions are set right. >>>> >>>> Cheers >>>> >>>> SteveW >>>> >>> >>> >> >> > >
when you use ftp.exe, just specify the host or ip name.
This looks like NAT + ftp passive mode issue since you able to access via ftp.exe active mode. Are you binding the site other than port 21? FTP Error: 500 Invalid PORT Command http://support.microsoft.com/?id=281193 also if you make IE becomes active mode, does it works? How to configure Internet Explorer to use both the FTP PORT mode and the FTP PASV mode in the Windows Server 2003 Family http://support.microsoft.com/?id=323446 -- Regards, Bernard Cheah http://www.iis.net/ http://www.iis-resources.com/ http://msmvps.com/blogs/bernard/ [quoted text, click to view] "stevew" <stevew@parkforce.com> wrote in message news:uCU1vqJGHHA.1264@TK2MSFTNGP03.phx.gbl... >I have un ticked the allow anonymous users in IIS. I can login via ftp.exe >via a user account. > This works for srv1 or 80.5.54.164. > srv1/swiff or 80.5.54.164/swiff give unknown host error. > Once logged into srv1 I can run cd swiff I then do dir and gt the > directory listing > When I do the same with 80.5.54.164 I can run cd swiff but when I do dir I > get: > 500 Invalid port command > 150 Opening Ascii mode data conection for /bin/ls > > The dos box just then hangs. > > I cannot log in using IE. Both logins fail ie on ftp://srv1 or > ftp://80.5.54.164 > > Cheers > > SteveW > "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message > news:%23ggPoi4FHHA.3616@TK2MSFTNGP02.phx.gbl... >> Try connect to the ip via ftp.exe at command prompt. post the output >> here. >> >> -- >> Regards, >> Bernard Cheah >> http://www.iis.net/ >> http://www.iis-resources.com/ >> http://msmvps.com/blogs/bernard/ >> >> >> "stevew" <stevewarby@btinternet.com> wrote in message >> news:%23m7mm7jFHHA.3616@TK2MSFTNGP02.phx.gbl... >>> We have IIS6. I have set up an FTP server. I can access it locally by >>> FTP://srv1/swiff but when I try ftp://80.5.54.164/swiff the login fails. >>> >>> This ftp directory is the same as a web virtual directory which works >>> fine so I presum all mt permissions are set right. >>> >>> Cheers >>> >>> SteveW >>> >> >> > >
How do I use the prot command. There is no reference to this on the page.?
Cheers SteveW [quoted text, click to view] "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message news:uv04OdeGHHA.1252@TK2MSFTNGP02.phx.gbl... > For IIS 6.0, I believe it still applied. > For IE, have you restart IE after you enable the ftp folder view? > Try it on locally first. > > -- > Regards, > Bernard Cheah > http://www.iis.net/ > http://www.iis-resources.com/ > http://msmvps.com/blogs/bernard/ > > > "Park2" <Stevewarby@btinternet.com> wrote in message > news:%23XR9QhRGHHA.4652@TK2MSFTNGP04.phx.gbl... >> We are using sbs 2003 >> http://support.microsoft.com/?id=281193 >> say's it is for NT4 & 2000. I do not understand where I apply the >> command. >> >> I have change the explorer setting and I just get a page cannot be >> displayed error. >> >> From Firefox I get the login screen and error: 426 connection closed >> >> From IE6 I get: >> An error occured opening that folder on the FTP server. Make sure you >> have permission to access folder >> Details >> 200 Type set to A >> 227(entering passive mode)(192.168.0.1,97,52) >> 426 connection closed; transfer aborted >> >> Hope this helps >> >> Cheers >> >> SteveW >> >> "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message >> news:eR5PNYQGHHA.1080@TK2MSFTNGP05.phx.gbl... >>> when you use ftp.exe, just specify the host or ip name. >>> >>> This looks like NAT + ftp passive mode issue since you able to access >>> via ftp.exe active mode. >>> >>> Are you binding the site other than port 21? >>> FTP Error: 500 Invalid PORT Command >>> http://support.microsoft.com/?id=281193 >>> >>> also if you make IE becomes active mode, does it works? >>> How to configure Internet Explorer to use both the FTP PORT mode and the >>> FTP PASV mode in the Windows Server 2003 Family >>> http://support.microsoft.com/?id=323446 >>> >>> -- >>> Regards, >>> Bernard Cheah >>> http://www.iis.net/ >>> http://www.iis-resources.com/ >>> http://msmvps.com/blogs/bernard/ >>> >>> >>> "stevew" <stevew@parkforce.com> wrote in message >>> news:uCU1vqJGHHA.1264@TK2MSFTNGP03.phx.gbl... >>>>I have un ticked the allow anonymous users in IIS. I can login via >>>>ftp.exe via a user account. >>>> This works for srv1 or 80.5.54.164. >>>> srv1/swiff or 80.5.54.164/swiff give unknown host error. >>>> Once logged into srv1 I can run cd swiff I then do dir and gt the >>>> directory listing >>>> When I do the same with 80.5.54.164 I can run cd swiff but when I do >>>> dir I get: >>>> 500 Invalid port command >>>> 150 Opening Ascii mode data conection for /bin/ls >>>> >>>> The dos box just then hangs. >>>> >>>> I cannot log in using IE. Both logins fail ie on ftp://srv1 or >>>> ftp://80.5.54.164 >>>> >>>> Cheers >>>> >>>> SteveW >>>> "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message >>>> news:%23ggPoi4FHHA.3616@TK2MSFTNGP02.phx.gbl... >>>>> Try connect to the ip via ftp.exe at command prompt. post the output >>>>> here. >>>>> >>>>> -- >>>>> Regards, >>>>> Bernard Cheah >>>>> http://www.iis.net/ >>>>> http://www.iis-resources.com/ >>>>> http://msmvps.com/blogs/bernard/ >>>>> >>>>> >>>>> "stevew" <stevewarby@btinternet.com> wrote in message >>>>> news:%23m7mm7jFHHA.3616@TK2MSFTNGP02.phx.gbl... >>>>>> We have IIS6. I have set up an FTP server. I can access it locally by >>>>>> FTP://srv1/swiff but when I try ftp://80.5.54.164/swiff the login >>>>>> fails. >>>>>> >>>>>> This ftp directory is the same as a web virtual directory which works >>>>>> fine so I presum all mt permissions are set right. >>>>>> >>>>>> Cheers >>>>>> >>>>>> SteveW >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >
Cured......
I can access from an external web site via IE but not within the domain.... Thanks for the help. .... [quoted text, click to view] > How do I use the prot command. There is no reference to this on the page.? > > Cheers > > SteveW > > > "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message > news:uv04OdeGHHA.1252@TK2MSFTNGP02.phx.gbl... >> For IIS 6.0, I believe it still applied. >> For IE, have you restart IE after you enable the ftp folder view? >> Try it on locally first. >> >> -- >> Regards, >> Bernard Cheah >> http://www.iis.net/ >> http://www.iis-resources.com/ >> http://msmvps.com/blogs/bernard/ >> >> >> "Park2" <Stevewarby@btinternet.com> wrote in message >> news:%23XR9QhRGHHA.4652@TK2MSFTNGP04.phx.gbl... >>> We are using sbs 2003 >>> http://support.microsoft.com/?id=281193 >>> say's it is for NT4 & 2000. I do not understand where I apply the >>> command. >>> >>> I have change the explorer setting and I just get a page cannot be >>> displayed error. >>> >>> From Firefox I get the login screen and error: 426 connection closed >>> >>> From IE6 I get: >>> An error occured opening that folder on the FTP server. Make sure you >>> have permission to access folder >>> Details >>> 200 Type set to A >>> 227(entering passive mode)(192.168.0.1,97,52) >>> 426 connection closed; transfer aborted >>> >>> Hope this helps >>> >>> Cheers >>> >>> SteveW >>> >>> "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message >>> news:eR5PNYQGHHA.1080@TK2MSFTNGP05.phx.gbl... >>>> when you use ftp.exe, just specify the host or ip name. >>>> >>>> This looks like NAT + ftp passive mode issue since you able to access >>>> via ftp.exe active mode. >>>> >>>> Are you binding the site other than port 21? >>>> FTP Error: 500 Invalid PORT Command >>>> http://support.microsoft.com/?id=281193 >>>> >>>> also if you make IE becomes active mode, does it works? >>>> How to configure Internet Explorer to use both the FTP PORT mode and >>>> the FTP PASV mode in the Windows Server 2003 Family >>>> http://support.microsoft.com/?id=323446 >>>> >>>> -- >>>> Regards, >>>> Bernard Cheah >>>> http://www.iis.net/ >>>> http://www.iis-resources.com/ >>>> http://msmvps.com/blogs/bernard/ >>>> >>>> >>>> "stevew" <stevew@parkforce.com> wrote in message >>>> news:uCU1vqJGHHA.1264@TK2MSFTNGP03.phx.gbl... >>>>>I have un ticked the allow anonymous users in IIS. I can login via >>>>>ftp.exe via a user account. >>>>> This works for srv1 or 80.5.54.164. >>>>> srv1/swiff or 80.5.54.164/swiff give unknown host error. >>>>> Once logged into srv1 I can run cd swiff I then do dir and gt the >>>>> directory listing >>>>> When I do the same with 80.5.54.164 I can run cd swiff but when I do >>>>> dir I get: >>>>> 500 Invalid port command >>>>> 150 Opening Ascii mode data conection for /bin/ls >>>>> >>>>> The dos box just then hangs. >>>>> >>>>> I cannot log in using IE. Both logins fail ie on ftp://srv1 or >>>>> ftp://80.5.54.164 >>>>> >>>>> Cheers >>>>> >>>>> SteveW >>>>> "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message >>>>> news:%23ggPoi4FHHA.3616@TK2MSFTNGP02.phx.gbl... >>>>>> Try connect to the ip via ftp.exe at command prompt. post the output >>>>>> here. >>>>>> >>>>>> -- >>>>>> Regards, >>>>>> Bernard Cheah >>>>>> http://www.iis.net/ >>>>>> http://www.iis-resources.com/ >>>>>> http://msmvps.com/blogs/bernard/ >>>>>> >>>>>> >>>>>> "stevew" <stevewarby@btinternet.com> wrote in message >>>>>> news:%23m7mm7jFHHA.3616@TK2MSFTNGP02.phx.gbl... >>>>>>> We have IIS6. I have set up an FTP server. I can access it locally >>>>>>> by FTP://srv1/swiff but when I try ftp://80.5.54.164/swiff the login >>>>>>> fails. >>>>>>> >>>>>>> This ftp directory is the same as a web virtual directory which >>>>>>> works fine so I presum all mt permissions are set right. >>>>>>> >>>>>>> Cheers >>>>>>> >>>>>>> SteveW >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >
For IIS 6.0, I believe it still applied.
For IE, have you restart IE after you enable the ftp folder view? Try it on locally first. -- Regards, Bernard Cheah http://www.iis.net/ http://www.iis-resources.com/ http://msmvps.com/blogs/bernard/ [quoted text, click to view] "Park2" <Stevewarby@btinternet.com> wrote in message news:%23XR9QhRGHHA.4652@TK2MSFTNGP04.phx.gbl... > We are using sbs 2003 > http://support.microsoft.com/?id=281193 > say's it is for NT4 & 2000. I do not understand where I apply the command. > > I have change the explorer setting and I just get a page cannot be > displayed error. > > From Firefox I get the login screen and error: 426 connection closed > > From IE6 I get: > An error occured opening that folder on the FTP server. Make sure you have > permission to access folder > Details > 200 Type set to A > 227(entering passive mode)(192.168.0.1,97,52) > 426 connection closed; transfer aborted > > Hope this helps > > Cheers > > SteveW > > "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message > news:eR5PNYQGHHA.1080@TK2MSFTNGP05.phx.gbl... >> when you use ftp.exe, just specify the host or ip name. >> >> This looks like NAT + ftp passive mode issue since you able to access via >> ftp.exe active mode. >> >> Are you binding the site other than port 21? >> FTP Error: 500 Invalid PORT Command >> http://support.microsoft.com/?id=281193 >> >> also if you make IE becomes active mode, does it works? >> How to configure Internet Explorer to use both the FTP PORT mode and the >> FTP PASV mode in the Windows Server 2003 Family >> http://support.microsoft.com/?id=323446 >> >> -- >> Regards, >> Bernard Cheah >> http://www.iis.net/ >> http://www.iis-resources.com/ >> http://msmvps.com/blogs/bernard/ >> >> >> "stevew" <stevew@parkforce.com> wrote in message >> news:uCU1vqJGHHA.1264@TK2MSFTNGP03.phx.gbl... >>>I have un ticked the allow anonymous users in IIS. I can login via >>>ftp.exe via a user account. >>> This works for srv1 or 80.5.54.164. >>> srv1/swiff or 80.5.54.164/swiff give unknown host error. >>> Once logged into srv1 I can run cd swiff I then do dir and gt the >>> directory listing >>> When I do the same with 80.5.54.164 I can run cd swiff but when I do dir >>> I get: >>> 500 Invalid port command >>> 150 Opening Ascii mode data conection for /bin/ls >>> >>> The dos box just then hangs. >>> >>> I cannot log in using IE. Both logins fail ie on ftp://srv1 or >>> ftp://80.5.54.164 >>> >>> Cheers >>> >>> SteveW >>> "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message >>> news:%23ggPoi4FHHA.3616@TK2MSFTNGP02.phx.gbl... >>>> Try connect to the ip via ftp.exe at command prompt. post the output >>>> here. >>>> >>>> -- >>>> Regards, >>>> Bernard Cheah >>>> http://www.iis.net/ >>>> http://www.iis-resources.com/ >>>> http://msmvps.com/blogs/bernard/ >>>> >>>> >>>> "stevew" <stevewarby@btinternet.com> wrote in message >>>> news:%23m7mm7jFHHA.3616@TK2MSFTNGP02.phx.gbl... >>>>> We have IIS6. I have set up an FTP server. I can access it locally by >>>>> FTP://srv1/swiff but when I try ftp://80.5.54.164/swiff the login >>>>> fails. >>>>> >>>>> This ftp directory is the same as a web virtual directory which works >>>>> fine so I presum all mt permissions are set right. >>>>> >>>>> Cheers >>>>> >>>>> SteveW >>>>> >>>> >>>> >>> >>> >> >> > >
huh? so you manage to configure IE as active mode.
what do you mean within the domain? is this machine part of domain? u got prompt or ? -- Regards, Bernard Cheah http://www.iis.net/ http://www.iis-resources.com/ http://msmvps.com/blogs/bernard/ [quoted text, click to view] "Park2" <Stevewarby@btinternet.com> wrote in message news:utoEh%23gGHHA.1816@TK2MSFTNGP06.phx.gbl... > Cured...... > > I can access from an external web site via IE but not within the > domain.... > > Thanks for the help. > > > ... >> How do I use the prot command. There is no reference to this on the >> page.? >> >> Cheers >> >> SteveW >> >> >> "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message >> news:uv04OdeGHHA.1252@TK2MSFTNGP02.phx.gbl... >>> For IIS 6.0, I believe it still applied. >>> For IE, have you restart IE after you enable the ftp folder view? >>> Try it on locally first. >>> >>> -- >>> Regards, >>> Bernard Cheah >>> http://www.iis.net/ >>> http://www.iis-resources.com/ >>> http://msmvps.com/blogs/bernard/ >>> >>> >>> "Park2" <Stevewarby@btinternet.com> wrote in message >>> news:%23XR9QhRGHHA.4652@TK2MSFTNGP04.phx.gbl... >>>> We are using sbs 2003 >>>> http://support.microsoft.com/?id=281193 >>>> say's it is for NT4 & 2000. I do not understand where I apply the >>>> command. >>>> >>>> I have change the explorer setting and I just get a page cannot be >>>> displayed error. >>>> >>>> From Firefox I get the login screen and error: 426 connection closed >>>> >>>> From IE6 I get: >>>> An error occured opening that folder on the FTP server. Make sure you >>>> have permission to access folder >>>> Details >>>> 200 Type set to A >>>> 227(entering passive mode)(192.168.0.1,97,52) >>>> 426 connection closed; transfer aborted >>>> >>>> Hope this helps >>>> >>>> Cheers >>>> >>>> SteveW >>>> >>>> "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message >>>> news:eR5PNYQGHHA.1080@TK2MSFTNGP05.phx.gbl... >>>>> when you use ftp.exe, just specify the host or ip name. >>>>> >>>>> This looks like NAT + ftp passive mode issue since you able to access >>>>> via ftp.exe active mode. >>>>> >>>>> Are you binding the site other than port 21? >>>>> FTP Error: 500 Invalid PORT Command >>>>> http://support.microsoft.com/?id=281193 >>>>> >>>>> also if you make IE becomes active mode, does it works? >>>>> How to configure Internet Explorer to use both the FTP PORT mode and >>>>> the FTP PASV mode in the Windows Server 2003 Family >>>>> http://support.microsoft.com/?id=323446 >>>>> >>>>> -- >>>>> Regards, >>>>> Bernard Cheah >>>>> http://www.iis.net/ >>>>> http://www.iis-resources.com/ >>>>> http://msmvps.com/blogs/bernard/ >>>>> >>>>> >>>>> "stevew" <stevew@parkforce.com> wrote in message >>>>> news:uCU1vqJGHHA.1264@TK2MSFTNGP03.phx.gbl... >>>>>>I have un ticked the allow anonymous users in IIS. I can login via >>>>>>ftp.exe via a user account. >>>>>> This works for srv1 or 80.5.54.164. >>>>>> srv1/swiff or 80.5.54.164/swiff give unknown host error. >>>>>> Once logged into srv1 I can run cd swiff I then do dir and gt the >>>>>> directory listing >>>>>> When I do the same with 80.5.54.164 I can run cd swiff but when I do >>>>>> dir I get: >>>>>> 500 Invalid port command >>>>>> 150 Opening Ascii mode data conection for /bin/ls >>>>>> >>>>>> The dos box just then hangs. >>>>>> >>>>>> I cannot log in using IE. Both logins fail ie on ftp://srv1 or >>>>>> ftp://80.5.54.164 >>>>>> >>>>>> Cheers >>>>>> >>>>>> SteveW >>>>>> "Bernard Cheah [MVP]" <qbernard@hotmail.com.discuss> wrote in message >>>>>> news:%23ggPoi4FHHA.3616@TK2MSFTNGP02.phx.gbl... >>>>>>> Try connect to the ip via ftp.exe at command prompt. post the output >>>>>>> here. >>>>>>> >>>>>>> -- >>>>>>> Regards, >>>>>>> Bernard Cheah >>>>>>> http://www.iis.net/ >>>>>>> http://www.iis-resources.com/ >>>>>>> http://msmvps.com/blogs/bernard/ >>>>>>> >>>>>>> >>>>>>> "stevew" <stevewarby@btinternet.com> wrote in message >>>>>>> news:%23m7mm7jFHHA.3616@TK2MSFTNGP02.phx.gbl... >>>>>>>> We have IIS6. I have set up an FTP server. I can access it locally >>>>>>>> by FTP://srv1/swiff but when I try ftp://80.5.54.164/swiff the >>>>>>>> login fails. >>>>>>>> >>>>>>>> This ftp directory is the same as a web virtual directory which >>>>>>>> works fine so I presum all mt permissions are set right. >>>>>>>> >>>>>>>> Cheers >>>>>>>> >>>>>>>> SteveW >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >
Don't see what you're looking for? Try a search.
|
June 2004
July 2004
August 2004
September 2004
October 2004
November 2004
December 2004
January 2005
February 2005
March 2005
April 2005
May 2005
June 2005
July 2005
August 2005
September 2005
October 2005
November 2005
December 2005
January 2006
February 2006
March 2006
April 2006
May 2006
June 2006
July 2006
August 2006
September 2006
October 2006
November 2006
December 2006
January 2007
February 2007
March 2007
April 2007
May 2007
June 2007
July 2007
August 2007
September 2007
October 2007
November 2007
December 2007
January 2008
February 2008
March 2008
April 2008
May 2008
June 2008
| home · blog · groups | Questions? Comments? Contact the dn |