"gabrielle" <gabrielle@discussions.microsoft.com> wrote in message
news:62A31E36-2A96-4A48-A676-5E0419B85800@microsoft.com...
> It actually took a reboot. This is going to have about 250 sites on it.
> Do
> you know anything about why the firewall won't start? I turned off the
> service Routeing and Remote Access and I still can't get into the
> firewall.
> I plan on putting a Cisco Pix infront of this server. I am sure it won't
> matter but it is just bothersome that I can't get it to work.
>
> Thank you for your help
> --
> Gabrielle J. Giroux
> Senior Network Engineer
>
>
> "Bernard Cheah [MVP]" wrote:
>
>> Ok, start with basic first.
>>
>> if you getting
>> 5- FTP says "This site cannot be started because another site is running
>> on
>> this computer is already using the IP address and TCP port values that
>> you
>> have specified for this site. Please change either the IP Address or the
>> TCP
>> port values for this site."
>>
>> how many ftp sites you running? if you have more than 1 make sure
>> ip/port
>> are unique.
>> also check if you have other program binding on port 21.
>> command prompt, entere
>> c:\> nestat -ano
>>
>> do you see any port 21 binding?
>>
>>
>> --
>> Regards,
>> Bernard Cheah
>> http://www.iis-resources.com/
>> http://www.iiswebcastseries.com/
>> http://msmvps.com/blogs/bernard/
>>
>>
>> "gabrielle" <gabrielle@discussions.microsoft.com> wrote in message
>> news:2355DB43-5087-463A-BB12-18BA1567C935@microsoft.com...
>> >I guess I should tell you that this same IP and website works fine on my
>> > other 2003 Server. I am not using Active Directory on the other one
>> > that
>> > is
>> > why I don't want to put this site there. I am in testing mode.
>> > However,
>> > I
>> > can't even get this to start without isolation
>> >
>> > Thanks again
>> > --
>> > Gabrielle J. Giroux
>> > Senior Network Engineer
>> >
>> >
>> > "gabrielle" wrote:
>> >
>> >> Have 2003 v2 Server- Domain name is myco.local.
>> >>
>> >> 1- Setup 1 website on the server ie. 10.0.0.200 port 80
>> >> 2- active directory user is there
>> >> 3- Website is viewable
>> >> 4- Setup FTP IP - Same 10.0.0.200- Port 21 - Stopped
>> >> 5- FTP says "This site cannot be started because another site is
>> >> running
>> >> on
>> >> this computer is already using the IP address and TCP port values that
>> >> you
>> >> have specified for this site. Please change either the IP Address or
>> >> the
>> >> TCP
>> >> port values for this site."
>> >> 6- Even if I am not ISOLATING USERS just setting up a basic FTP i get
>> >> the
>> >> same error. I want is ISOLATE.
>> >>
>> >> Could this still have something to do with RRAS??
>> >> I just had an Issue with RRAS beinging on but since I stopped the
>> >> service
>> >> the website is viewable.
>> >>
>> >> 1st - can anyone help me with this
>> >>
>> >> 2nd - does anyone have documentation on setting up from the
>> >> beginning -
>> >> everything that it takes to ISOLATE USERS with Active directory?
>> >>
>> >> THANK YOU SO MUCH
>> >> --
>> >> Gabrielle J. Giroux
>> >> Senior Network Engineer
>>
>>
>>