<dapollon83@gmail.com> wrote in message
news:1192329970.134502.262800@i13g2000prf.googlegroups.com...
> Hello,
>
> I'm tring to transfer a file from an ftp to another using the passive
> protocol. The transfer is managed by a third pc. Ftp servers are in a
> network different different than the client, a firewall is in the
> middle. I've limited the port range and I'ave opend all this port in
> the firewall. The problem is that if I try to execute passive command
> from one of the server the transfer is ok, but when I try to execute
> the command in the client the transfer abort. The comand that fail is
> literal port .... in the second server.
>
> Please help me
>
> Thanks
>

<dapollon83@gmail.com> wrote in message
news:1192651717.583139.306330@q3g2000prf.googlegroups.com...
> Ftp servers are in a network, the client is in another. There is a
> firewall in the middle but ports are open, if I put the client in the
> same network that the server the transfer works, if the client is in a
> differen' network doesn't. If I try to use active it works, also if
> the client is in another network.
>

<dapollon83@gmail.com> wrote in message
news:1192697448.390433.274550@v29g2000prd.googlegroups.com...
> The range ports are opened in the firewall
>

<dapollon83@gmail.com> wrote in message
news:1193142992.625950.172230@e9g2000prf.googlegroups.com...
> The port range is big enough
>

<dapollon83@gmail.com> wrote in message
news:1193402919.112966.41250@o3g2000hsb.googlegroups.com...
>I cannot disable the firewall because it's a too big network.
> i don't think that is a firewall problema, but there is the problem
> because the client is on a third pc. I've already created all the
> relative key in the registry
>