> Does anyone know of any good tutorials on setting up a smtp server in the
> following situation. I think i have my setup right and i want to see what
i
> may have done wrong
> I have one server that i use for inbound mail filtering for spam
(WEBSERVER)
> and av and then my exchange server. (EXCHANGE)
> My internet mx says send all email to WEBSERVER.MYDOM.COM. This server is
> AFAIK successfully receiving email sent from outside. WEBSERVER filters
the
> email and then sends to EXCHANGE.MYDOM.COM.
> WEBSERVER has my domain setup as a remote domain and set to forward using
> smarthost, the ip of EXCHANGE is entered in brackets in the box. I also
have
> the allow incoming email to be relayed to this domain box checked. On
> EXCHANGE I have the IP of WEBSERVER in the allow relay settings. When
> WEBSERVER tries to send email to EXCHANGE I do see a connected session in
> the current sessions view, that session will last as long as my timeout
> settings allow (10 minutes). After which the connection is dropped and i
get
> and Event ID 4006 on WEBSERVER: Message delivery to the host '10.x.x.x'
> failed while delivering to the remote domain 'MYDOM.COM' for the following
> reason: The connection was dropped by the remote host.
> What have i done wrong? what do i need to fix?
> Thanks
> Matthew Loraditch
>
>

"Leif Pedersen [MVP]" <leif.pedersenNOSPAM@get2net.dk> wrote in message
news:%235aql6b7FHA.2152@TK2MSFTNGP10.phx.gbl...
> Hi,
>
> From your post it appears that you have configured everything correct (you
> don't need to allow the webserver to relay thru the exchange server but
> that
> shouldn't cause the problem you are seeing).
>
> You have configured 'MYDOM.COM' in a recipient policy on the exchange
> server?
>
> Leif
>
> "Matthew Loraditch" <mloradites AT yahoo DOT com> skrev i en meddelelse
> news:%23n6LfmW7FHA.252@TK2MSFTNGP15.phx.gbl...
>> Does anyone know of any good tutorials on setting up a smtp server in the
>> following situation. I think i have my setup right and i want to see what
> i
>> may have done wrong
>> I have one server that i use for inbound mail filtering for spam
> (WEBSERVER)
>> and av and then my exchange server. (EXCHANGE)
>> My internet mx says send all email to WEBSERVER.MYDOM.COM. This server is
>> AFAIK successfully receiving email sent from outside. WEBSERVER filters
> the
>> email and then sends to EXCHANGE.MYDOM.COM.
>> WEBSERVER has my domain setup as a remote domain and set to forward using
>> smarthost, the ip of EXCHANGE is entered in brackets in the box. I also
> have
>> the allow incoming email to be relayed to this domain box checked. On
>> EXCHANGE I have the IP of WEBSERVER in the allow relay settings. When
>> WEBSERVER tries to send email to EXCHANGE I do see a connected session in
>> the current sessions view, that session will last as long as my timeout
>> settings allow (10 minutes). After which the connection is dropped and i
> get
>> and Event ID 4006 on WEBSERVER: Message delivery to the host '10.x.x.x'
>> failed while delivering to the remote domain 'MYDOM.COM' for the
>> following
>> reason: The connection was dropped by the remote host.
>> What have i done wrong? what do i need to fix?
>> Thanks
>> Matthew Loraditch
>>
>>
>
>

"Leif Pedersen [MVP]" <leif.pedersenNOSPAM@get2net.dk> wrote in message
news:%235aql6b7FHA.2152@TK2MSFTNGP10.phx.gbl...
> Hi,
>
> From your post it appears that you have configured everything correct (you
> don't need to allow the webserver to relay thru the exchange server but
> that
> shouldn't cause the problem you are seeing).
>
> You have configured 'MYDOM.COM' in a recipient policy on the exchange
> server?
>
> Leif
>
> "Matthew Loraditch" <mloradites AT yahoo DOT com> skrev i en meddelelse
> news:%23n6LfmW7FHA.252@TK2MSFTNGP15.phx.gbl...
>> Does anyone know of any good tutorials on setting up a smtp server in the
>> following situation. I think i have my setup right and i want to see what
> i
>> may have done wrong
>> I have one server that i use for inbound mail filtering for spam
> (WEBSERVER)
>> and av and then my exchange server. (EXCHANGE)
>> My internet mx says send all email to WEBSERVER.MYDOM.COM. This server is
>> AFAIK successfully receiving email sent from outside. WEBSERVER filters
> the
>> email and then sends to EXCHANGE.MYDOM.COM.
>> WEBSERVER has my domain setup as a remote domain and set to forward using
>> smarthost, the ip of EXCHANGE is entered in brackets in the box. I also
> have
>> the allow incoming email to be relayed to this domain box checked. On
>> EXCHANGE I have the IP of WEBSERVER in the allow relay settings. When
>> WEBSERVER tries to send email to EXCHANGE I do see a connected session in
>> the current sessions view, that session will last as long as my timeout
>> settings allow (10 minutes). After which the connection is dropped and i
> get
>> and Event ID 4006 on WEBSERVER: Message delivery to the host '10.x.x.x'
>> failed while delivering to the remote domain 'MYDOM.COM' for the
>> following
>> reason: The connection was dropped by the remote host.
>> What have i done wrong? what do i need to fix?
>> Thanks
>> Matthew Loraditch
>>
>>
>
>

"Matthew Loraditch" <mloradites AT yahoo DOT com> wrote in message
news:uC2Q%23Si7FHA.2364@TK2MSFTNGP12.phx.gbl...
> Here is a copy of a portion of the smtpsvc logfiles from my exchange
> server with relevant entries relating to WEBSERVER
> 2:35:30 WEBSERVER EHLO - 250
> 2:35:30 WEBSERVER MAIL - 250
> 2:35:30 WEBSERVER RCPT - 250
> 2:36:16 WEBSERVER EHLO - 250
> 2:36:16 WEBSERVER MAIL - 250
> 2:36:16 WEBSERVER RCPT - 250
> 2:45:32 WEBSERVER TIMEOUT - 121
> 2:45:32 WEBSERVER QUIT - 240
> 2:47:02 WEBSERVER TIMEOUT - 121
> 2:47:02 WEBSERVER QUIT - 240
> 6:45:32 WEBSERVER EHLO - 250
> 6:45:32 WEBSERVER MAIL - 250
> 6:45:32 WEBSERVER RCPT - 250
> 6:46:48 WEBSERVER EHLO - 250
> 6:46:48 WEBSERVER MAIL - 250
> 6:46:48 WEBSERVER RCPT - 250
> 6:55:34 WEBSERVER TIMEOUT - 121
> 6:55:34 WEBSERVER QUIT - 240
> 6:57:04 WEBSERVER TIMEOUT - 121
> 6:57:04 WEBSERVER QUIT - 240
>
> Thanks Again
> matthew
> "Leif Pedersen [MVP]" <leif.pedersenNOSPAM@get2net.dk> wrote in message
> news:%235aql6b7FHA.2152@TK2MSFTNGP10.phx.gbl...
>> Hi,
>>
>> From your post it appears that you have configured everything correct
>> (you
>> don't need to allow the webserver to relay thru the exchange server but
>> that
>> shouldn't cause the problem you are seeing).
>>
>> You have configured 'MYDOM.COM' in a recipient policy on the exchange
>> server?
>>
>> Leif
>>
>> "Matthew Loraditch" <mloradites AT yahoo DOT com> skrev i en meddelelse
>> news:%23n6LfmW7FHA.252@TK2MSFTNGP15.phx.gbl...
>>> Does anyone know of any good tutorials on setting up a smtp server in
>>> the
>>> following situation. I think i have my setup right and i want to see
>>> what
>> i
>>> may have done wrong
>>> I have one server that i use for inbound mail filtering for spam
>> (WEBSERVER)
>>> and av and then my exchange server. (EXCHANGE)
>>> My internet mx says send all email to WEBSERVER.MYDOM.COM. This server
>>> is
>>> AFAIK successfully receiving email sent from outside. WEBSERVER filters
>> the
>>> email and then sends to EXCHANGE.MYDOM.COM.
>>> WEBSERVER has my domain setup as a remote domain and set to forward
>>> using
>>> smarthost, the ip of EXCHANGE is entered in brackets in the box. I also
>> have
>>> the allow incoming email to be relayed to this domain box checked. On
>>> EXCHANGE I have the IP of WEBSERVER in the allow relay settings. When
>>> WEBSERVER tries to send email to EXCHANGE I do see a connected session
>>> in
>>> the current sessions view, that session will last as long as my timeout
>>> settings allow (10 minutes). After which the connection is dropped and i
>> get
>>> and Event ID 4006 on WEBSERVER: Message delivery to the host '10.x.x.x'
>>> failed while delivering to the remote domain 'MYDOM.COM' for the
>>> following
>>> reason: The connection was dropped by the remote host.
>>> What have i done wrong? what do i need to fix?
>>> Thanks
>>> Matthew Loraditch
>>>
>>>
>>
>>
>
>