"pblse" <pblse2@yahoo.se> wrote in message
news:eFzRm2SkGHA.4672@TK2MSFTNGP02.phx.gbl...
> Check your relay restrictions.
>
> Also, ISP's that deliver home connections usually block the use of private
> smtp servers for spam reasons, you are supposed to use their smtp server.
>
> PL.
>
> "Steve" <steve@seametrix.com> skrev i meddelandet
> news:eGr2BZRkGHA.1508@TK2MSFTNGP04.phx.gbl...
> >I have a Win 2003 server with P3server and SMTP configured.
> > I am on a verizon DSL with a netgear firewall. Ports 80, 25, 110 are
open
> > referring to the internal IP address of my server.
> > I am using TZO DNS services to handle my dynamic IP address.
> > The first time I set it up I could send and receive email
> > Now for some reason I can only send email. I can't receive anything.
> > Through Telnet I get the 550 5.7.1 unable to relay ###@myserver.net
error.
> >
> > I have searched hi and low. I see lots of people have similar problems
> > with
> > this but there doesn't seem to be a clear cut option to fix it. Anyone
> > have
> > any ideas to try?
> >
> > Thanks,
> > Steve
> >
> >
>
>

"pblse" <pblse2@yahoo.se> wrote in message
news:essQu4WkGHA.4776@TK2MSFTNGP05.phx.gbl...
>
> You need to add the ip's you want to allow in the list under relay, if you
> have dynamic ip you will need to add it as a group of computers.
>
> PL.
>
>
> "Steve" <steve@seametrix.com> skrev i meddelandet
> news:OojzHkWkGHA.3440@TK2MSFTNGP02.phx.gbl...
> > Thanks for the response.
> >
> > I did call verizon (first level support) and they said no ports are
being
> > blocked.
> >
> > I am not all that familiar with how relay works but under SMTP I have
the
> > Use list option selected and the Allow All checked. There is nothing in
> > the
> > list however. But I was under the impression that with Allow All checked
> > that wouldn't matter.
> >
> > Thanks,
> > Steve
> >
>
>

"Steve" <steve@seametrix.com> wrote in message
news:eGr2BZRkGHA.1508@TK2MSFTNGP04.phx.gbl...
> I have a Win 2003 server with P3server and SMTP configured.
> I am on a verizon DSL with a netgear firewall. Ports 80, 25, 110 are open
> referring to the internal IP address of my server.
> I am using TZO DNS services to handle my dynamic IP address.
> The first time I set it up I could send and receive email
> Now for some reason I can only send email. I can't receive anything.
> Through Telnet I get the 550 5.7.1 unable to relay ###@myserver.net error.
>
> I have searched hi and low. I see lots of people have similar problems
with
> this but there doesn't seem to be a clear cut option to fix it. Anyone
have
> any ideas to try?
>
> Thanks,
> Steve
>
>

>I have a Win 2003 server with P3server and SMTP configured.
> I am on a verizon DSL with a netgear firewall. Ports 80, 25, 110 are open
> referring to the internal IP address of my server.
> I am using TZO DNS services to handle my dynamic IP address.
> The first time I set it up I could send and receive email
> Now for some reason I can only send email. I can't receive anything.
> Through Telnet I get the 550 5.7.1 unable to relay ###@myserver.net error.
>
> I have searched hi and low. I see lots of people have similar problems
> with
> this but there doesn't seem to be a clear cut option to fix it. Anyone
> have
> any ideas to try?
>
> Thanks,
> Steve
>
>

> Thanks for the response.
>
> I did call verizon (first level support) and they said no ports are being
> blocked.
>
> I am not all that familiar with how relay works but under SMTP I have the
> Use list option selected and the Allow All checked. There is nothing in
> the
> list however. But I was under the impression that with Allow All checked
> that wouldn't matter.
>
> Thanks,
> Steve
>