"Ash" <aliasgerj@hotmail.com> wrote in message
news:%23Bo4AohUDHA.2284@TK2MSFTNGP09.phx.gbl...
> Hi,
>
> I've just installed Visual Studio.NET on my computer, which runs on
> windows2000 server. When i creat web application and try run it from
vb.net,
> i get the following error:
>
> ===============
> Error while trying to run project: unable to start debugging on the web
> server. Server side-error occured during http request.
>
> Make sure the server is operation correctly. Verify there is no syntax
error
> in web.config by doing a debug. Start without debugging. You may want to
> refer to the ASP.NET and ALT Server debugging topic in the online
> documentation.
> ============
>
> On the event viewer, the following shows up:
> aspnet_wp.exe could not be started. HRESULT for the failure: 80004005
>
> I tried checking online, and i found about enabling debug to true on the
> web.config, which was enabled by default, but still having same problem.
I
> suspect could be some permission error, but haven't been able to figure
out.
>
> Anyone out there with an idea?
>
> Thanks,
>
> Ash
>
>

"Ash" <aliasgerj@hotmail.com> wrote in message
news:ezqBO2hUDHA.3312@tk2msftngp13.phx.gbl...
> Hi,
> I tried checking web.config, there's so many of them. I tried looking at
the
> one in my VB studio's solution explorer, looked fine.
> Where do i find processmodel's username? Which file does it contain?
> Initially i looked at the web.config file, but it doesn't have that tag,
any
> idea where i can find it?
> Thanks,
> Ash
> "Elliot M. Rodriguez" <elliotmrodriguez@hotspam.mail.com> wrote in message
> news:u4JrZuhUDHA.2360@TK2MSFTNGP10.phx.gbl...
> > - doublecheck web.config
> > - check that your user account is a member of Debugger Users group
> > - ensure that your web's Integrated Windows Authentication setting is
> > checked
> > - try changing the processModel's userName attribute to either a domain
> user
> > with higher access rights, or using SYSTEM
> > - re-register ASP.NET (from command line navigate to framework/version
> > folder and run aspnet_regiis.exe)
> >
> > --
> > Elliot M. Rodriguez, MCSD
> > *** It would take 227 cans of Mountain Dew to kill me***
> >
> >
> >
> > "Ash" <aliasgerj@hotmail.com> wrote in message
> > news:%23Bo4AohUDHA.2284@TK2MSFTNGP09.phx.gbl...
> > > Hi,
> > >
> > > I've just installed Visual Studio.NET on my computer, which runs on
> > > windows2000 server. When i creat web application and try run it from
> > vb.net,
> > > i get the following error:
> > >
> > > ===============
> > > Error while trying to run project: unable to start debugging on the
web
> > > server. Server side-error occured during http request.
> > >
> > > Make sure the server is operation correctly. Verify there is no syntax
> > error
> > > in web.config by doing a debug. Start without debugging. You may want
to
> > > refer to the ASP.NET and ALT Server debugging topic in the online
> > > documentation.
> > > ============
> > >
> > > On the event viewer, the following shows up:
> > > aspnet_wp.exe could not be started. HRESULT for the failure: 80004005
> > >
> > > I tried checking online, and i found about enabling debug to true on
the
> > > web.config, which was enabled by default, but still having same
problem.
> > I
> > > suspect could be some permission error, but haven't been able to
figure
> > out.
> > >
> > > Anyone out there with an idea?
> > >
> > > Thanks,
> > >
> > > Ash
> > >
> > >
> >
> >
>
>

"Ash" <aliasgerj@hotmail.com> wrote in message
news:ezqBO2hUDHA.3312@tk2msftngp13.phx.gbl...
> Hi,
> I tried checking web.config, there's so many of them. I tried looking at
the
> one in my VB studio's solution explorer, looked fine.
> Where do i find processmodel's username? Which file does it contain?
> Initially i looked at the web.config file, but it doesn't have that tag,
any
> idea where i can find it?
> Thanks,
> Ash
> "Elliot M. Rodriguez" <elliotmrodriguez@hotspam.mail.com> wrote in message
> news:u4JrZuhUDHA.2360@TK2MSFTNGP10.phx.gbl...
> > - doublecheck web.config
> > - check that your user account is a member of Debugger Users group
> > - ensure that your web's Integrated Windows Authentication setting is
> > checked
> > - try changing the processModel's userName attribute to either a domain
> user
> > with higher access rights, or using SYSTEM
> > - re-register ASP.NET (from command line navigate to framework/version
> > folder and run aspnet_regiis.exe)
> >
> > --
> > Elliot M. Rodriguez, MCSD
> > *** It would take 227 cans of Mountain Dew to kill me***
> >
> >
> >
> > "Ash" <aliasgerj@hotmail.com> wrote in message
> > news:%23Bo4AohUDHA.2284@TK2MSFTNGP09.phx.gbl...
> > > Hi,
> > >
> > > I've just installed Visual Studio.NET on my computer, which runs on
> > > windows2000 server. When i creat web application and try run it from
> > vb.net,
> > > i get the following error:
> > >
> > > ===============
> > > Error while trying to run project: unable to start debugging on the
web
> > > server. Server side-error occured during http request.
> > >
> > > Make sure the server is operation correctly. Verify there is no syntax
> > error
> > > in web.config by doing a debug. Start without debugging. You may want
to
> > > refer to the ASP.NET and ALT Server debugging topic in the online
> > > documentation.
> > > ============
> > >
> > > On the event viewer, the following shows up:
> > > aspnet_wp.exe could not be started. HRESULT for the failure: 80004005
> > >
> > > I tried checking online, and i found about enabling debug to true on
the
> > > web.config, which was enabled by default, but still having same
problem.
> > I
> > > suspect could be some permission error, but haven't been able to
figure
> > out.
> > >
> > > Anyone out there with an idea?
> > >
> > > Thanks,
> > >
> > > Ash
> > >
> > >
> >
> >
>
>

"Elliot M. Rodriguez" <elliotmrodriguez@hotspam.mail.com> wrote in message
news:u4JrZuhUDHA.2360@TK2MSFTNGP10.phx.gbl...
> - doublecheck web.config
> - check that your user account is a member of Debugger Users group
> - ensure that your web's Integrated Windows Authentication setting is
> checked
> - try changing the processModel's userName attribute to either a domain
user
> with higher access rights, or using SYSTEM
> - re-register ASP.NET (from command line navigate to framework/version
> folder and run aspnet_regiis.exe)
>
> --
> Elliot M. Rodriguez, MCSD
> *** It would take 227 cans of Mountain Dew to kill me***
>
>
>
> "Ash" <aliasgerj@hotmail.com> wrote in message
> news:%23Bo4AohUDHA.2284@TK2MSFTNGP09.phx.gbl...
> > Hi,
> >
> > I've just installed Visual Studio.NET on my computer, which runs on
> > windows2000 server. When i creat web application and try run it from
> vb.net,
> > i get the following error:
> >
> > ===============
> > Error while trying to run project: unable to start debugging on the web
> > server. Server side-error occured during http request.
> >
> > Make sure the server is operation correctly. Verify there is no syntax
> error
> > in web.config by doing a debug. Start without debugging. You may want to
> > refer to the ASP.NET and ALT Server debugging topic in the online
> > documentation.
> > ============
> >
> > On the event viewer, the following shows up:
> > aspnet_wp.exe could not be started. HRESULT for the failure: 80004005
> >
> > I tried checking online, and i found about enabling debug to true on the
> > web.config, which was enabled by default, but still having same problem.
> I
> > suspect could be some permission error, but haven't been able to figure
> out.
> >
> > Anyone out there with an idea?
> >
> > Thanks,
> >
> > Ash
> >
> >
>
>

"Elliot M. Rodriguez" <elliotmrodriguez@hotspam.mail.com> wrote in message
news:eG2vV%23hUDHA.584@TK2MSFTNGP12.phx.gbl...
> Ash:
>
> Try this from GotDotNet.
>
>
http://gotdotnet.com/team/csharp/learn/whitepapers/howtosolvedebuggerproblems.doc
>
> --
> Elliot M. Rodriguez, MCSD
> *** It would take 227 cans of Mountain Dew to kill me***
>
>
>
> "Ash" <aliasgerj@hotmail.com> wrote in message
> news:ezqBO2hUDHA.3312@tk2msftngp13.phx.gbl...
> > Hi,
> > I tried checking web.config, there's so many of them. I tried looking at
> the
> > one in my VB studio's solution explorer, looked fine.
> > Where do i find processmodel's username? Which file does it contain?
> > Initially i looked at the web.config file, but it doesn't have that tag,
> any
> > idea where i can find it?
> > Thanks,
> > Ash
> > "Elliot M. Rodriguez" <elliotmrodriguez@hotspam.mail.com> wrote in
message
> > news:u4JrZuhUDHA.2360@TK2MSFTNGP10.phx.gbl...
> > > - doublecheck web.config
> > > - check that your user account is a member of Debugger Users group
> > > - ensure that your web's Integrated Windows Authentication setting is
> > > checked
> > > - try changing the processModel's userName attribute to either a
domain
> > user
> > > with higher access rights, or using SYSTEM
> > > - re-register ASP.NET (from command line navigate to framework/version
> > > folder and run aspnet_regiis.exe)
> > >
> > > --
> > > Elliot M. Rodriguez, MCSD
> > > *** It would take 227 cans of Mountain Dew to kill me***
> > >
> > >
> > >
> > > "Ash" <aliasgerj@hotmail.com> wrote in message
> > > news:%23Bo4AohUDHA.2284@TK2MSFTNGP09.phx.gbl...
> > > > Hi,
> > > >
> > > > I've just installed Visual Studio.NET on my computer, which runs on
> > > > windows2000 server. When i creat web application and try run it from
> > > vb.net,
> > > > i get the following error:
> > > >
> > > > ===============
> > > > Error while trying to run project: unable to start debugging on the
> web
> > > > server. Server side-error occured during http request.
> > > >
> > > > Make sure the server is operation correctly. Verify there is no
syntax
> > > error
> > > > in web.config by doing a debug. Start without debugging. You may
want
> to
> > > > refer to the ASP.NET and ALT Server debugging topic in the online
> > > > documentation.
> > > > ============
> > > >
> > > > On the event viewer, the following shows up:
> > > > aspnet_wp.exe could not be started. HRESULT for the failure:
80004005
> > > >
> > > > I tried checking online, and i found about enabling debug to true on
> the
> > > > web.config, which was enabled by default, but still having same
> problem.
> > > I
> > > > suspect could be some permission error, but haven't been able to
> figure
> > > out.
> > > >
> > > > Anyone out there with an idea?
> > > >
> > > > Thanks,
> > > >
> > > > Ash
> > > >
> > > >
> > >
> > >
> >
> >
>
>